2 layers67.8 × 86.9 mm
2 layers60 × 40 mm
Kicad rs converter
artsi0m/6sem_practicePCB & docs for 6 semester practice
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 25
- Pads
- 85
- Tracks, vias
- 228, 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jun 2024
- Updated
- 12 Oct 2025
Overview
Kicad rs converter is an open-source printed circuit board by artsi0m, from the artsi0m/6sem_practice repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 60 × 40 mm with 29 parts on 25 nets, routed with 228 tracks and 16 vias.
It is built around the MAX485ED, BC807 and LM7805. Its parts include 11 resistors, 8 capacitors and 3 crystals.
Main components
3
MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICs
BC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1мк | Capacitor_SMD:C_1206_3216Metric | C1, C2, C7, C8 |
| 4 | 2к2 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 2 | 100н | Capacitor_SMD:C_1206_3216Metric | C4, C6 |
| 2 | 10мк | Capacitor_SMD:C_1206_3216Metric | C3, C5 |
| 2 | 1к | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric | R7, R10 |
| 2 | 560 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | BC807 | Package_TO_SOT_SMD:SOT-23 | VT1 |
| 1 | CONN_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | X3 |
| 1 | CONN_PWR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | X1 |
| 1 | CONN_RS232 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | X2 |
| 1 | GREEN | LED_SMD:LED_1210_3225Metric | HL2 |
| 1 | LM7805 | Package_TO_SOT_SMD:TO-252-2 | DA2 |
| 1 | MAX232_GOST | Package_SO:SO-16_3.9x9.9mm_P1.27mm | DA1 |
| 1 | MAX485 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | DA3 |
| 1 | RED | LED_SMD:LED_1210_3225Metric | HL1 |
| 1 | VD | Diode_SMD:D_0805_2012Metric | VD1 |
Questions
How big is the Kicad rs converter PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kicad rs converter use?
29 parts, built around the MAX485ED, BC807 and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad rs converter KiCad files?
From the artsi0m/6sem_practice repository on GitHub, at the commit this page was made from: the board is kicad-rs-converter/kicad-rs-converter.kicad_pcb and its schematic kicad-rs-converter/kicad-rs-converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad rs converter design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers5 × 8.2 mm
- 2 layers203.2 × 82.6 mm
- 2 layers181.1 × 139.9 mm
Campervan management
akladnig/CamperVan
- CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO
116 parts - 2 layers122.4 × 69.1 mm
- 4 layers129 × 104.6 mm
- 2 layers55 × 100 mm
- 2 layers40 × 24 mm
