4 layers120 × 75 mm
Portapack h1
portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M
111 parts5.5kGPL-3.0
4 layers120 × 75 mm
Portapack h1
arsscriptum/SmartMeter-ReverseEngineering1smart-meter rever engineering
- Size
- 120 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 146
- Pads
- 518
- Tracks, vias
- 1,346, 436
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Aug 2024
- Updated
- 11 Aug 2024
Overview
Portapack h1 is an open-source printed circuit board by arsscriptum, from the arsscriptum/SmartMeter-ReverseEngineering repository on GitHub. It is a 4-layer board of 120 × 75 mm with 87 parts on 146 nets, routed with 1,346 tracks and 436 vias.
It is built around the 5M40ZE64C5N and NUF4220MN. Its parts include 36 capacitors, 17 resistors, 8 connectors, 6 ICs and 2 diodes.
Main components
2
5M40ZE64C5N
EQFP-64(7x7)0℃~+85℃ 1.71V~1.89V 32 40 40 54 7.5ns In-system programming MAX V EQFP-64(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
NUF4220MN
DFN-8-EP(2x2)-40℃~+85℃ 16MHz 205pF 3 30dB@800MHz~5GHz 4 4.9nH 850mΩ Yes DFN-8-EP(2x2) EMI/RFI Filters (LC, RC Networks) ROHSonsemiEMI/RFI Filters (LC, RC Networks)
README
README.mdSMART METER REVERSE-ENGINEERING
https://www.youtube.com/watch?v=7sKDRsiy07k
Pico Puller https://github.com/beroset/pico-puller Prior Logged Data No One has Figured out https://github.com/BitBangingBytes/GridStream-Power-Usage-Data
Raspberry Pi Pico https://amzn.to/4dvODZY Soldering Kit https://amzn.to/3ZDG35p HackRF Software Defined Radio https://amzn.to/48x7dPD RTL SDR https://amzn.to/48xHgzq
WIKI https://wiki.recessim.com/
IF YOU WANT TO SEND SOMETHING INTERESTING... :) RECESSIM 7201 Virginia Pkwy Unit 6131 McKinney, TX 75071
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10U | ipc_capc:IPC_CAPC2012X135L45N | C7, C11, C13, C26, C32, C34, C36, C37, C38, C40, C42, C43 |
| 11 | 100N | ipc_capc:IPC_CAPC1005X55L25N | C2, C3, C4, C5, C27, C28, C29, C30, C31, C33, C35 |
| 11 | DNP | ipc_resc:IPC_RESC1005X40L25N | R1, R3, R4, R5, R6, R7, R8, R9, R10, R13, R14 |
| 6 | TP | tp:TP_1MM | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 2U2 | ipc_capc:IPC_CAPC1608X90L35N | C6, C8, C10, C12 |
| 4 | DNP | ipc_capc:IPC_CAPC2012X135L45N | C1, C15, C16, C41 |
| 4 | FIDUCIAL | fiducial:FIDUCIAL_65MIL | FID1, FID2, FID3, FID4 |
| 4 | HOLE1 | hole:HOLE_3200UM_VIAS | H2, H3, H4, H5 |
| 2 | 1U | ipc_capc:IPC_CAPC1608X90L35N | C14, C25 |
| 2 | 220N | ipc_capc:IPC_CAPC1608X90L35N | C22, C23 |
| 2 | 33R | ipc_resc:IPC_RESC1608X55L25N | R11, R12 |
| 2 | DNI | ipc_resc:IPC_RESC1005X40L25N | R19, R20 |
| 2 | DNP | ipc_ledc:IPC_LEDC1608X90L40N | D1, D2 |
| 1 | 220R | ipc_resc:IPC_RESCAXS8P80_320X160X60L30X45N | RP1 |
| 1 | 2K2 | ipc_resc:IPC_RESC1608X55L25N | R18 |
| 1 | 5M40ZE64 | ipc_qfp:IPC_QFP65P40_900X900X120L60X18T450N | U3 |
| 1 | AK4951EN | ipc_qfn:IPC_QFN33P40_400X400X80L35X20T280N | U1 |
| 1 | BATTERY | bat_coin:MPD_BU2032SM-BT-G | BT1 |
| 1 | CAT4004[_AB] | ipc_son:IPC_SON9P50_200X200X55L32X24T90X160N | U4 |
| 1 | CK_TSWB-3N-CB | ck:CK_TSWB-3N-CB222_LFS | SW1 |
| 1 | DNI | ipc_resc:IPC_RESC1608X55L25N | R2 |
| 1 | DNP | ipc_qfn:IPC_QFN17P50_300X300X100L40X25T160N | U6 |
| 1 | DNP | jst:JST_S2B-PH-SM4-TB | J4 |
| 1 | DNP | ipc_capc:IPC_CAPC1608X90L35N | C39 |
| 1 | ER-TFT024-3_FPC | eastrising:ER-CON50HT-1 | J3 |
| 1 | ER-TFT024-3_PANEL | eastrising:ER-TFT024-3 | LCD1 |
| 1 | HACKRF_ONE_P20 | header:HEADER_11X2_REV_SM_254_AP | P20 |
| 1 | HACKRF_ONE_P22 | header:HEADER_13X2_REV_SM_254_AP | P22 |
| 1 | HACKRF_ONE_P28 | header:HEADER_11X2_REV_SM_254_AP | P28 |
| 1 | HEADER_1X3 | jst:JST_S3B-PH-SM4-TB | J1 |
| 1 | MICROSD_DETSW | alps:ALPS_SCHA4B0419 | J2 |
| 1 | NUF4220MN | ipc_son:IPC_SON9P50_200X200X100L30X25T80X120N | U5 |
| 1 | REGULATOR_SOT23_5 | ipc_sot:IPC_SOT23-5P95_275X135L40X40N | U2 |
| 1 | TRRS_SW_JACK | cui:CUI_SJ-43516-SMT | P2 |
Questions
How big is the Portapack h1 PCB?
It measures 120 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Portapack h1 use?
87 parts, built around the 5M40ZE64C5N and NUF4220MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Portapack h1 KiCad files?
From the arsscriptum/SmartMeter-ReverseEngineering repository on GitHub, at the commit this page was made from: the board is Projects/portapack-havoc/hardware/portapack_h1/portapack_h1.kicad_pcb and its schematic pico-puller/adapter_board/pico_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Portapack h1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask arsscriptum before reusing the design.
Similar boards
- 4 layers120 × 75 mm
Portapack hackrf one
dronefpgabasedarchitecture-pizza/portapack
Portable software-defined radio add-on for HackRF Jawbreaker
92 parts7GPL-2.0 - 2 layers48 × 24.8 mm
Xmos cpld
bfarago/xmos_cpld_slice
This is a slice extender panel, which contains a small cpld, aimed to have configurable the bridge between the slot and the slice panel.
15 partsLGPL-3.0 - 2 layers96.5 × 96.5 mm
- 4 layers172.2 × 91.9 mm
Front PCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
87 parts617CERN-OHL-S-2.0 - 4 layers50 × 87 mm
EnergyMe Home
jibrilsharafi/EnergyMe-Home
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)
87 parts288GPL-3.0 - 4 layers105.5 × 83 mm
Board main
bmurmann/EE628
EE 628: Analysis and Design of Integrated Circuits (University of Hawaiʻi at Mānoa)
87 parts203MIT - 4 layers83.3 × 33.4 mm
