4 layers68.6 × 53.3 mm
Pcb main nautilus atmega4809
apcountryman/pcb-main-nautilus-atmega4809
A Microchip ATmega4809 based mainboard PCB.
91 parts
2 layers147.3 × 119.4 mm
PCB Design
arsal18/HW-LabThis reporsitory contains the lab work and the project of module Hardware Engineering.
- Size
- 147.3 × 119.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 92
- Pads
- 638
- Tracks, vias
- 603, 30
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 May 2023
- Updated
- 4 Jul 2023
Overview
PCB Design is an open-source printed circuit board by arsal18, from the arsal18/HW-Lab repository on GitHub. It is a 2-layer board of 147.3 × 119.4 mm with 69 parts on 92 nets, routed with 603 tracks and 30 vias.
It is built around the TPS65581PWP, ERJ3EKF3300V and C0603G104K5RACT250, with the 800AWSP9M2QE and 2N7002E among its other parts. Its parts include 25 resistors, 21 capacitors, 8 switches, 4 ICs and 3 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
5
TPS65581PWP
HTSSOP-20-EP-40℃~+85℃@(TA) 1.5A、2.5A 3 4.5V~18V 700kHz 764mV~7V Adjustable Buck Buck Built-in Yes HTSSOP-20-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
ERJ3EKF3300V
0603-55℃~+155℃ 100mW 330Ω 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface MountC0603G104K5RACT250
-- New Arrivals ROHSKEMETUncategorised
800AWSP9M2QE
插件-30℃~+85℃ 28V 3A 50,000 cycles Black Non-Latching PC Pin Round Plunger SPST-NO Through Hole 插件 Pushbutton Switches ROHSE-SwitchPushbutton Switches
2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETs
README
README.mdHW-Lab
This reporsitory contains the lab work and the project of module Hardware Engineering.
Group Members:
- Arsal Abbasi
- Ahmed Helmy
- Jires Donfack Voufo
PLEASE NOTE
We have uploaded our complete alarm clock in the Project folder. There are three different folders in Project folder.
- VHDL_Design contains our alarm-clock design files on ModelSim, including testbench and simulation results.
- FPGA_Design contatins our all source files from Vivado including the top file which is named Temp_on_7seg, the screenshots of synthesis results reports are also attached.
- PCB_Design folder contains all files of our PCB design and schematic.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | ERJ3EKF3300V | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 21 | C0603G104K5RACT250 | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +5 |
| 4 | 800AWSP9M2QE | Button_Switch_THT:SW_PUSH_6mm | S3, S4, S5, S6 |
| 3 | B3FS_1010P | Button_Switch_THT:SW_PUSH_6mm | S1, S2, S8 |
| 2 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | CA56-12CGKWA | Display_7Segment:CA56-12CGKWA | U3, U4 |
| 2 | INDUCTOR | Inductor_SMD:L_0201_0603Metric | L1, L2 |
| 2 | LED_Small | LED_SMD:LED_0402_1005Metric | D1, D3 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | DSC61XX | Crystal:Resonator_SMD_Murata_CDSCB-2Pin_4.5x2.0mm | X1 |
| 1 | LED | LED_THT:LED_D3.0mm_Clear | D2 |
| 1 | MINI-SPDT-SW | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | S7 |
| 1 | R_Network04 | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | TPS65581 | Package_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias | U1 |
| 1 | XC7S50-FTGB196 | Package_BGA:BGA-400_21.0x21.0mm_Layout20x20_P1.0mm | U5 |
| 1 | XILINX_JTAG | Connector_PinHeader_2.00mm:PinHeader_2x07_P2.00mm_Vertical_SMD | J2 |
Questions
How big is the PCB Design PCB?
It measures 147.3 × 119.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Design use?
69 parts, built around the TPS65581PWP, ERJ3EKF3300V, C0603G104K5RACT250 and 800AWSP9M2QE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Design KiCad files?
From the arsal18/HW-Lab repository on GitHub, at the commit this page was made from: the board is Project/PCB_Design/new/PCB.kicad_pcb and its schematic Project/PCB_Design/Alarm-Clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Design design in my own project?
Its repository states no licence, so its author keeps all rights: ask arsal18 before reusing the design.
Similar boards
- 4 layers150 × 110 mm
Controller
micthiesen/crystal-shim
Aquarium skimmer controller: capacitive sensing, ESP32-C6 firmware, and separated mains switching
117 parts - 2 layers269.2 × 149.9 mm
Mainwork
MaximSpeczyk/IoT-FPGA
University Project Teamwork for Advanced Embedded Systems and Hardware Engineering.
125 parts1 - 4 layers157.5 × 137.2 mm
- 4 layers85.7 × 100.6 mm
Alaram update
DOLUWAMU-TAIWO/TD
Avdanced Embdedded Labs (IOT) And Hardware Engineering (PCB/VHDL)
120 parts - 4 layers31.2 × 30.7 mm
Key chain
pyryzx/USB-Powersupply-keychain
powersupply key chain that provides output voltages of 1,8V 3,3V 5V with maximum 1,5A per rail. It also outputs 12V
43 partsAGPL-3.0 - 4 layers89 × 72 mm
- 6 layers31.7 × 110 mm
Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
155 parts241