Skip to the content
2 layers65.5 × 61 mmBeamer, the printed circuit board in 3D

Lite motion capture system that can accurately track small objects

Size
65.5 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
48
Pads
126
Tracks, vias
175, 23
Pours
10
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 May 2023
Updated
7 Jun 2024

Overview

Beamer is an open-source printed circuit board by arjunmehtaa, from the arjunmehtaa/motion-capture-lite repository on GitHub. It is a 2-layer board of 65.5 × 61 mm with 42 parts on 48 nets, routed with 175 tracks and 23 vias.

It is built around the PJA3432-AU_R1_000A1, VSMA1094250 and NRPN021PAEN-RC. Its parts include 17 resistors, 7 capacitors, 7 ICs, 3 connectors and 1 inductor. It belongs with the ESP8266 boards of this library.

Main components

3

README

README.md

Motion Capture Lite

Project created as part of the FYDP Capstone (ECE 2024).

Created by: Arjun Mehta, Aryaman Singh, Kevin Kalathil, Nicolas Bao

Project Abstract

The objective of this project is to build a “lite” motion-capture device that can accurately track small objects that are normally too difficult to track using just a camera. The device uses semi-passive imperceptible markers, which refer to projectors that illuminate small LED marker tags placed on objects. The marker tags are equipped with photosensors to detect light from a projector, and a microcontroller. The markers will process and communicate the results back to a computer where a software tool, through signal processing, converts recorded motion data from the device into 3D motion vectors and allows for real-time tracking.

System Design

Files

  • README.md: This file.

  • report.pdf: The final report for the project.

  • poster.pdf: Poster for Capstone Presentation.

  • beamer_wifi.ino: Arduino code for the beamers

  • tag_wifi.ino: Arduino code for the tags

  • udp_server.py: Python code for the server (receives data from the tags)

  • udp_server_calibrate.py: Optional tool to help calibrate the system

  • visualizer.py: 3D Visualization tool for tag motion (requires matplotlib)

  • rust_sender/*: Rust code for the sender (sends data to the tags)

  • schematics/*: Schematics for the project (tag and beamer)

  • old/*: Old code and files - please ignore!

Parts

42
QtyValueFootprintReferences
6330 OhmResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R8, R9, R10, R11, R12
650 OhmResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R13, R14, R15, R16, R17
6PJA3432-AU_R1_000A1Package_TO_SOT_SMD:SOT-23-3U2, U3, U4, U5, U6, U7
6VSMA1094250footprints:DIODE_VSMA1094250_VISCR1, CR2, CR3, CR4, CR5, CR6
3NRPN021PAEN-RCConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ1, J2, J3
20.1 uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC3, C7
210 kOhmResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2, R3
210 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
222 uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C9
10.3 OhmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
11 kOhmResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
120 uFfootprints:CAPC1810X80NC4
13.3 uHfootprints:IND_ASPI-4020S-3R3M-TL1
130 kOhmResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR4
1Adafruit_Feather_HUZZAH_ESP8266Module:Adafruit_FeatherA1
1TPS562207DRLRPackage_TO_SOT_SMD:SOT-666U8

More from arjunmehtaa/motion-capture-lite

1
  • 2 layers36.9 × 58.4 mmTag, the printed circuit board in 3D

    Tag

    arjunmehtaa/motion-capture-lite

    Lite motion capture system that can accurately track small objects

    6 parts

Similar boards

  • 4 layers160 × 100 mmEurocard HV piezo driver, the printed circuit board in 3D

    Eurocard HV piezo driver

    dyknapp/-ion-optics-hv

    Open Eurocard-HV-piezo-driver.kicadpro with KiCad 10.0.7 or a compatible later version. The project contains six schematic sheets and a four-layer PCB.

    172 parts
  • 2 layers30 × 50 mmModuleV400, the printed circuit board in 3D

    ModuleV400

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    42 parts1.1k
  • 2 layers139.7 × 64.8 mmSprig console, the printed circuit board in 3D

    Sprig console

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    42 parts1.1kMIT
  • 2 layers90.5 × 50 mmMain control board, the printed circuit board in 3D

    Main control board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    42 parts1.1k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    42 parts1kGPL-3.0
  • 2 layers190 × 80 mmPcb shield, the printed circuit board in 3D

    Pcb shield

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    42 parts915
  • 2 layers98 × 80 mmMai io, the printed circuit board in 3D

    Mai io

    whowechina/mai_pico

    Pico controller for Maimai

    42 parts475

Questions

How big is the Beamer PCB?

It measures 65.5 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Beamer use?

42 parts, built around the PJA3432-AU_R1_000A1, VSMA1094250 and NRPN021PAEN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Beamer KiCad files?

From the arjunmehtaa/motion-capture-lite repository on GitHub, at the commit this page was made from: the board is schematics/Beamer.kicad_pcb and its schematic schematics/Beamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Beamer design in my own project?

Its repository states no licence, so its author keeps all rights: ask arjunmehtaa before reusing the design.