Skip to the content
2 layers36.9 × 58.4 mmTag, the printed circuit board in 3D

Lite motion capture system that can accurately track small objects

Size
36.9 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
28
Pads
37
Tracks, vias
21, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 May 2023
Updated
7 Jun 2024

Overview

Tag is an open-source printed circuit board by arjunmehtaa, from the arjunmehtaa/motion-capture-lite repository on GitHub. It is a 2-layer board of 36.9 × 58.4 mm with 6 parts on 28 nets, routed with 21 tracks and 0 vias.

It is built around the 1541201NEA400, NRPN021PAEN-RC and RMCF2512JT10R0. Its parts include 2 connectors, 1 resistor and 1 IC. It belongs with the ESP8266 boards of this library.

Main components

3

README

README.md

Motion Capture Lite

Project created as part of the FYDP Capstone (ECE 2024).

Created by: Arjun Mehta, Aryaman Singh, Kevin Kalathil, Nicolas Bao

Project Abstract

The objective of this project is to build a “lite” motion-capture device that can accurately track small objects that are normally too difficult to track using just a camera. The device uses semi-passive imperceptible markers, which refer to projectors that illuminate small LED marker tags placed on objects. The marker tags are equipped with photosensors to detect light from a projector, and a microcontroller. The markers will process and communicate the results back to a computer where a software tool, through signal processing, converts recorded motion data from the device into 3D motion vectors and allows for real-time tracking.

System Design

Files

  • README.md: This file.

  • report.pdf: The final report for the project.

  • poster.pdf: Poster for Capstone Presentation.

  • beamer_wifi.ino: Arduino code for the beamers

  • tag_wifi.ino: Arduino code for the tags

  • udp_server.py: Python code for the server (receives data from the tags)

  • udp_server_calibrate.py: Optional tool to help calibrate the system

  • visualizer.py: 3D Visualization tool for tag motion (requires matplotlib)

  • rust_sender/*: Rust code for the sender (sends data to the tags)

  • schematics/*: Schematics for the project (tag and beamer)

  • old/*: Old code and files - please ignore!

Parts

6
QtyValueFootprintReferences
2NRPN021PAEN-RCConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ1, J2
11541201NEA400Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderU1
1Adafruit_Feather_HUZZAH_ESP8266Module:Adafruit_FeatherA1
1RMCF2512JT10R0Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1TestPointTestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP1

More from arjunmehtaa/motion-capture-lite

1
  • 2 layers65.5 × 61 mmBeamer, the printed circuit board in 3D

    Beamer

    arjunmehtaa/motion-capture-lite

    Lite motion capture system that can accurately track small objects

    42 parts

Similar boards

  • 4 layers160 × 100 mmEurocard HV piezo driver, the printed circuit board in 3D

    Eurocard HV piezo driver

    dyknapp/-ion-optics-hv

    Open Eurocard-HV-piezo-driver.kicadpro with KiCad 10.0.7 or a compatible later version. The project contains six schematic sheets and a four-layer PCB.

    172 parts
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT

Questions

How big is the Tag PCB?

It measures 36.9 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tag use?

6 parts, built around the 1541201NEA400, NRPN021PAEN-RC and RMCF2512JT10R0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tag KiCad files?

From the arjunmehtaa/motion-capture-lite repository on GitHub, at the commit this page was made from: the board is schematics/Tag.kicad_pcb and its schematic schematics/Beamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tag design in my own project?

Its repository states no licence, so its author keeps all rights: ask arjunmehtaa before reusing the design.