arithmaldor/Inline-SCART-SplitterSplit SCART in 2 while plugging into a device.
Inline SCART Splitter is an open-source printed circuit board by arithmaldor, from the arithmaldor/Inline-SCART-Splitter repository on GitHub. It is a 2-layer board of 59 × 42.7 mm with 42 parts on 59 nets, routed with 297 tracks and 30 vias.
It is built around the THS7374. Its parts include 16 resistors, 15 capacitors, 4 connectors and 1 IC.
Split a SCART signal in 2 in as little space as possible.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 75 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N_Pad2.25x2.55mm_HandSolder | C8, C9, C10, C11, C12, C13, C14, C15 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C5, C6, C7 |
| 4 | 5.6M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7, R8 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 220 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | SCART-F | Tinkerplunk:SCART-F-RA | J1 |
| 1 | SCART-F | Tinkerplunk:SCART_F_VERT | J4 |
| 1 | SCART-F | Tinkerplunk:MALE_SCART | J3 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | THS7374 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
The 38 most common of 42 parts.
It measures 59 × 42.7 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the THS7374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the arithmaldor/Inline-SCART-Splitter repository on GitHub, at the commit this page was made from: the board is Inline SCART Splitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask arithmaldor before reusing the design.
RIP-Felix/MEGA-AV-main
Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.
Shank-Mods/Wii-BVM-Card
A simplified version of the BKM-129X compatible board.
borti4938/n64rgb_flex
This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.
buffis/betsubetsu
BetsuBetsu is an Open Source Audio+Video splitter for streaming/recording video from Arcade games (Jamma).
jamvanderloeff/RGB-to-NTSC
Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using
arithmaldor/SCART-Splitter
A simple THS7374 based SCART splitter, can easily be adapter to a variety of connectors.
