Skip to the content
2 layers27.9 × 19.3 mmRaspberryPiHat, the printed circuit board in 3D

Hardward addon for the Raspberry Pi

Size
27.9 × 19.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
18
Pads
36
Tracks, vias
68, 2
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 May 2019
Updated
15 May 2019

Overview

RaspberryPiHat is an open-source printed circuit board by ARHollisSr, from the ARHollisSr/RaspberryPiHat repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 19.3 mm with 11 parts on 18 nets, routed with 68 tracks and 2 vias.

It is built around the DHT22. Its parts include 4 resistors, 2 diodes, 1 IC, 1 connector and 1 switch.

Main components

1

README

README.md

RaspberryPiHat

Hardward addon for the Raspberry Pi

Parts

11
QtyValueFootprintReferences
210kΩResistor_SMD:R_0805_2012MetricR1, R2
2330ΩResistor_SMD:R_0805_2012MetricR3, R4
2LEDLED_SMD:LED_0805_2012MetricD1, D2
1DHT22Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalU1
1LOGOKiCad Graphics:3HitComboLogoInvertedG***
1Raspberry_Pi_2_3Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ1
1SW_DPSTfreetronics_footprints:SW_PUSHBUTTON_PTHSW1

The 10 most common of 11 parts.

Similar boards

  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers40.6 × 50.8 mmIot sourdough starter monitor, the printed circuit board in 3D

    Iot sourdough starter monitor

    justinmklam/iot-sourdough-starter-monitor

    Tracking the fermentation of sourdough starter over the cloud.

    7 parts93GPL-3.0
  • 2 layers28 × 13 mmDHT22 pcb, the printed circuit board in 3D

    DHT22 pcb

    MakersAsylumIndia/M19O2

    M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle

    5 parts68MIT
  • 2 layers136 × 100 mmClimateSprinklerController, the printed circuit board in 3D

    ClimateSprinklerController

    kbx81/ClimateSprinklerController

    ESP32-based climate and sprinkler controller for use with ESPHome

    194 parts56
  • 2 layers162 × 60 mmEsp shield, the printed circuit board in 3D

    Esp shield

    felixwittwer/homeassistant_automaic_greenhouse

    A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

    20 parts27
  • 2 layers74.9 × 40.6 mmAnavi thermometer, the printed circuit board in 3D

    Anavi thermometer

    AnaviTechnology/anavi-thermometer

    WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules

    25 parts17
  • 2 layers81.3 × 36.8 mmAirQualitySensor, the printed circuit board in 3D

    AirQualitySensor

    Finomnis/AirQualitySensor

    Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8

    44 parts16Apache-2.0

Questions

How big is the RaspberryPiHat PCB?

It measures 27.9 × 19.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RaspberryPiHat use?

11 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RaspberryPiHat KiCad files?

From the ARHollisSr/RaspberryPiHat repository on GitHub, at the commit this page was made from: the board is RaspberryPiHat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RaspberryPiHat design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).