Skip to the content
2 layers29 × 19 mmLamp remote mcu, the printed circuit board in 3D

Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

Size
29 × 19 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
8
Pads
33
Tracks, vias
98, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
28 Jul 2024
Updated
28 Jul 2024

Overview

Lamp remote mcu is an open-source printed circuit board by ArgonautGit, from the ArgonautGit/kicad-projects repository on GitHub. It is a 2-layer board of 29 × 19 mm with 10 parts on 8 nets, routed with 98 tracks and 0 vias.

It is built around the ATTINY13A-PU. Its parts include 4 capacitors, 2 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

kicad-projects

Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

Parts

10
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2
210uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3, C4
110kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
1ATtiny13A-PPackage_DIP:DIP-8_W7.62mm_LongPadsU1
1RXcustom:rxJ2
1SCREW TERMINALTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1SWITCHButton_Switch_THT:SW_PUSH_6mmSW1

The 9 most common of 10 parts.

More from ArgonautGit/kicad-projects

10
  • 2 layers30 × 30 mmAudio, the printed circuit board in 3D

    Audio

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    27 parts
  • 2 layers66 × 35 mmFlyback 2, the printed circuit board in 3D

    Flyback 2

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    27 parts
  • 2 layers38.5 × 21 mmLamp remote, the printed circuit board in 3D

    Lamp remote

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    20 parts
  • 2 layers32.5 × 24 mmAtmega remote, the printed circuit board in 3D

    Atmega remote

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    15 parts
  • 2 layers34 × 19.8 mmMc34063 boost converter, the printed circuit board in 3D

    Mc34063 boost converter

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    14 parts
  • 2 layers39 × 23 mmStm proto 2, the printed circuit board in 3D

    Stm proto 2

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    14 parts
  • 2 layers34 × 17 mmTransmitter, the printed circuit board in 3D

    Transmitter

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    13 parts
  • 2 layers55 × 32 mmOxyhydro, the printed circuit board in 3D

    Oxyhydro

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    11 parts
  • 2 layers47.6 × 15.1 mmDuty cycle, the printed circuit board in 3D

    Duty cycle

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    9 parts
  • 2 layersCIM driver, the printed circuit board in 3D

    CIM driver

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    7 parts

Similar boards

  • 2 layers99.7 × 63.9 mmNES CN ROM-256-05, the printed circuit board in 3D

    NES CN ROM-256-05

    emeargt/nes-cnrom

    KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB

    17 parts31CC-BY-SA-4.0
  • 2 layers100 × 61.4 mmCart, the printed circuit board in 3D

    Cart

    digilogistist/The-Open-Source-USB-NES-Project

    USB-NES and NES-FASTGFX product engineering repository

    38 parts24CC0-1.0
  • 2 layers100 × 100 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Terminus-IMRC/RPiCluster2

    Yet another Raspberry Pi cluster, version 2

    334 parts9
  • 2 layers22.9 × 30.7 mmOnewire led, the printed circuit board in 3D

    Onewire led

    kcuzner/onewire-leds

    An RGB LED driver on a modified one-wire bus

    11 parts4MIT
  • 4 layers243.8 × 243.8 mmSbc 8088, the printed circuit board in 3D

    Sbc 8088

    miselin/M88

    The M88 Computer

    218 parts2CERN-OHL-P-2.0
  • 6 layers100.1 × 112 mmPicones, the printed circuit board in 3D

    Picones

    WiiMake/picones

    In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.

    59 parts1
  • 2 layers27.9 × 15.2 mmFF2 20241213 1510, the printed circuit board in 3D

    FF2 20241213 1510

    25mmHg/AlteFabrik191126

    Flimmerfeen2.0

    12 partsBSD-3-Clause
  • 2 layers140 × 60 mmA277d led tachometer, the printed circuit board in 3D

    A277d led tachometer

    bazsimarkus/a277d-led-tachometer

    An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.

    61 parts

Questions

How big is the Lamp remote mcu PCB?

It measures 29 × 19 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lamp remote mcu use?

10 parts, built around the ATTINY13A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lamp remote mcu KiCad files?

From the ArgonautGit/kicad-projects repository on GitHub, at the commit this page was made from: the board is lamp-remote-mcu/lamp-remote-mcu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lamp remote mcu design in my own project?

Its repository states no licence, so its author keeps all rights: ask ArgonautGit before reusing the design.