Skip to the content
2 layers24 × 34 mmElec board, the printed circuit board in 3D

Open, low-cost torsion balance for measuring the spurious forces (supply-lead Lorentz forces, heating, convection) that dominate small-force and thrust experiments: printable CadQuery mechanics, a validated force-noise model, and JLCPCB-assembled RP2040 electronics designed in KiCad and ngspice.

Size
24 × 34 mm
Copper layers
2
Thickness
1.2 mm
Parts
2
Nets
2
Pads
2
Tracks, vias
3, 1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Oct 2026
Updated
7 Nov 2026

Overview

Elec board is an open-source printed circuit board by arcticoder, from the arcticoder/spurious-force-balance repository on GitHub, published under the MIT licence. It is a 2-layer board of 24 × 34 mm with 2 parts on 2 nets, routed with 3 tracks and 1 via.

It belongs with the sensors and measurement boards and the RP2040 boards of this library.

README

README.md

spurious-force-balance

An open, low-cost torsion balance for measuring the spurious forces that dominate small-force and thrust experiments, with printable mechanics, a validated force-noise model and fab-assembled electronics.

The question. On an open, fully SMT-assembled, low-cost torsion balance operating in air, quantify the forces that usually pass for thrust: the Lorentz force of supply-lead currents in the ambient magnetic field, and the thermal and convective forces of a dissipating device. Measure them as functions of current, lead geometry and dissipated power, with the balance's force noise floor, calibration constant and drift fully characterized. The instrument claim is a resolution of 0.4 nN or better (5σ on a 20 nN term) in a 1000 s measurement, at a parts cost to be filled in from the final bill of materials.

Status

PieceState
G1 measurement goalconfirmed 2026-10-23
G2 mechanicsan FR4 arm board on edge hung from a torsion head, collision-free over the swing, centre of mass solved onto the axis; JLC mechanical boards (Gerbers and DRC done); stock-size acrylic enclosure; field-modelled eddy damper; cutting jigs; fabrication decisions, assembly steps
G3 force-noise prediction0.108 nN (1σ, 1000 s, in air): a conditional go
WP1–WP3: requirements, 48 JLC-stocked parts, analog block simulationsdone
WP4 schematicdone as checked netlists (main board + four head boards, 50 JLC parts); sheet rendering and WP5 layout wait
A5: prototype noise measurementnext; it decides layout and the board order

The prediction is dominated by air currents (4.8 nN/√Hz), so the verdict flips at about 4 mm/s of air-speed fluctuation; the enclosure is the biggest noise control. The model reproduces six published numbers, from Soni and Roy (Rev. Sci. Instrum. 84, 095103, 2013) and the cryogenic torsion balance of arXiv:2206.02890.

Layout

PathWhat
docs/plan.mdthe plan: goal, mechanics, noise budget, environment control, calibration
docs/fabrication.md, docs/assembly.mdhow each part is made (fab boards, PLA, bought; JLC orders, coupons and parcels) and how to build it
docs/bringup.md, docs/procedures.mdpowering up the electronics step by step; the prototype check, calibration and measurement campaign
docs/paper/the paper skeleton (LaTeX; results are placeholders)
hardware/balance/parametric CAD (balance.py, STL and STEP in cad/), the FR4 boards for JLC (boards.py, boards/fab/), jigs, analytic model, parameters, checks
hardware/instrument/the electronics: requirements, pin map, parts table, ngspice simulations, checks
hardware/tools/jlc_query.pysearch of the JLCPCB parts snapshot
tools/force_noise_budget.pythe force-noise prediction and the anchor checks
docs/TODO-agent.md, docs/TODO-arcticoder.mdthe work lists (TODO-BLOCKED.md, TODO-backlog.md, TODO-completed.md beside them)

Running the checks

Setup (Linux/WSL) is in hardware/README.md: KiCad 9, a Python venv with CadQuery, SKiDL and ngspice.

text
python3 tools/force_noise_budget.py                       # the noise prediction and anchor checks
~/.venvs/lab-hw/bin/python tools/run_all_smoke_tests.py   # CAD, pin map, power budget, simulations

Construction rules

  • Every electronic part is a machine-placed SMT part from JLCPCB's own library; nothing is hand-soldered and nothing is mailed to the fab.
  • USB power only; nothing above 50 V DC or 30 V AC. The device current is capped at 300 mA by the USB budget.
  • The balance carries no permanent magnet on the moving arm (a 6 × 3 mm N42 disc alone would add about 7 nN/√Hz of field noise); masses on the arm are brass or plastic.

Companion circuits

The bench circuits this experiment uses for its prototype check (lock-in amplifier, optical shadow readout, R-2R signal generator) live in arcticoder/lab, which also holds the shared parts inventory and order ledger.

License

  • Code (MIT, LICENSE): the Python sources, including the CadQuery scripts and the noise model.
  • Hardware designs and their documentation (CERN-OHL-P v2, LICENSE-HARDWARE): the CAD outputs (STL, STEP), KiCad files when they exist, SPICE netlists, parts tables and BOMs, and the assembly and design documents. A CadQuery .py file is code (MIT) whose output is hardware (CERN-OHL-P).

More from arcticoder/spurious-force-balance

2
  • 2 layers76 × 70 mmHeads panel, the printed circuit board in 3D

    Heads panel

    arcticoder/spurious-force-balance

    Open, low-cost torsion balance for measuring the spurious forces (supply-lead Lorentz forces, heating, convection) that dominate small-force and thrust experiments: printable CadQuery mechanics, a validated force-noise…

    58 partsMIT
  • 2 layers36 × 96.5 mmSmall panel, the printed circuit board in 3D

    Small panel

    arcticoder/spurious-force-balance

    Open, low-cost torsion balance for measuring the spurious forces (supply-lead Lorentz forces, heating, convection) that dominate small-force and thrust experiments: printable CadQuery mechanics, a validated force-noise…

    41 partsMIT

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Elec board PCB?

It measures 24 × 34 mm and has 2 copper layers, 1.2 mm thick.

What parts does the Elec board use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Elec board KiCad files?

From the arcticoder/spurious-force-balance repository on GitHub, at the commit this page was made from: the board is hardware/balance/boards/elec_board.kicad_pcb and its schematic hardware/instrument/schematic/out/sensor_head_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Elec board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).