

Remex wch
CH32V307 GigE development board
- Size
- 83.8 × 22.9 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 102
- Nets
- 112
- Pads
- 474
- Tracks, vias
- 1,510, 190
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Sep 2024
- Updated
- 6 Sep 2024
Overview
Remex wch is an open-source printed circuit board by ArcaneNibble, from the ArcaneNibble/remex-wch repository on GitHub, published under the 0BSD licence. It is a 4-layer board of 83.8 × 22.9 mm with 102 parts on 112 nets, routed with 1,510 tracks and 190 vias.
It is built around the CH32V307WCU6, HUSB311BLA and RTL8211F-CG, with the LGS5500EP, LW5233N11E and MS5351M among its other parts. Its parts include 33 resistors, 32 capacitors, 9 ICs, 6 connectors and 3 diodes. It belongs with the RISC-V boards of this library.
Main components
8CH32V307WCU6
QFN-68(8x8)QFN-68(8x8) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)HUSB311BLA
QFN-14L-40℃~+125℃ 1 330Kbps 3V~5.5V Transceiver QFN-14L USB Converters ROHSHynetekUSB ConvertersRTL8211F-CG
WQFN-40-EP(5x5)1.5V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s Ethernet Transceiver RGMII WQFN-40-EP(5x5) Ethernet Transceivers ROHSREALTEKEthernet TransceiversLGS5500EP
ESOP-8-40℃~+125℃ 1 1A 2.9V 3uA 4.2V、4.3V、4.35V、4.6V 4.5V~5.5V Charging IC Lithium Battery Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、欠压锁定、Overcurrent Protection、Short-Circuit Protection、过压保护 ESOP-8 Battery Management ROHSLegend-SiBattery ManagementLW5233N11E
DFN-4L(1x1)-40℃~+125℃@(Tj) 1 3.3V 40uA 42mV@(100mA) 500mA 6V 95dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive DFN-4L(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLewa MicroVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMS5351M
MSOP-10-55℃~+150℃ 2.7V~3.3V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSHangzhou Ruimeng TechClock Generators, PLLs, Frequency SynthesizersPY32F002AW15U
QFN16_3X3QFN16_3X3 New Arrivals ROHSPUYAUncategorisedSC7A20
LGA-12_2.0x2.0x0.5P-1LGA-12(2x2x0.5) New Arrivals ROHSHangzhou Silan MicroelectronicsUncategorised
README
README.mdProject codename "remex"
remex (noun)
a primary or secondary quill feather of the wing of a bird

This is intended to be a "maker"-friendly board for the CH32V307 RISC-V microcontroller from WCH. The main selling points are gigabit Ethernet and USB-C including host support.
Status
There's a vaguely-complete layout, but actual ordering is pending final schematic review as well as further stress-testing of the chosen LiPo charger circuitry.
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C23, C24, C27, C28 +7 |
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R5, R20, R26, R27, R28, R29, R30, R31, R32, R33 |
| 10 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R21, R22, R23, R25 |
| 2 | 2.2 uH | parts:L_Changjiang_FXL0420 | L1, L2 |
| 2 | 20 pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22 uF | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 330 pF | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 510 | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H3, H4 |
| 2 | NetTie_2 | parts:nettie_tiny | NT1, NT2 |
| 1 | 1 uF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 10 uF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 2.49k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 25 MHz 10 pF X322525MMB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 32.768kHz 12.5 pF Q13FC13500004 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 4.7 uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | AUX_SWCLK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | AUX_SWDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5 |
| 1 | CH32V307WCU6 | Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm | U1 |
| 1 | CLK_UNUSED | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | HUSB311 | parts:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.4x1.4mm | U4 |
| 1 | JST_PH | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J7 |
| 1 | LGS5500 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U7 |
| 1 | LW5233N11E | Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm | U6 |
| 1 | MS5351M | Package_SO:MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | NTC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6 |
| 1 | PY32F002AW15U | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U8 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | RJ45_Hanrun_HR911130C | parts:RJ45_Hanrun_HR911130C | J5 |
| 1 | RTC_TAMPER | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | RTL8211F | parts:QFN-40-1EP_5x5mm_P0.4mm_EP3.7x3.7mm | U2 |
| 1 | SC7A20 | Package_LGA:LGA-12_2x2mm_P0.5mm | U9 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | SY6820 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | VBAT | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | uSD SHOU HAN | parts:microSD_SHOU_HAN_H1.8 | J4 |
Questions
How big is the Remex wch PCB?
It measures 83.8 × 22.9 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Remex wch use?
102 parts, built around the CH32V307WCU6, HUSB311BLA, RTL8211F-CG and LGS5500EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remex wch KiCad files?
From the ArcaneNibble/remex-wch repository on GitHub, at the commit this page was made from: the board is remex-wch.kicad_pcb and its schematic remex-wch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remex wch design in my own project?
Its repository publishes it under the 0BSD licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 62.8 mm

- 4 layers14 × 32.7 mm

- 4 layers40 × 50 mm

- 4 layers107.5 × 56 mm

Output panel
gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.
179 partsCERN-OHL-S-2.0 - 2 layers285 × 94.6 mm

- 4 layers101.8 × 50 mm

China lcsc undoc parts test
ArcaneNibble/china-lcsc-undoc-parts-test
Test some China / LCSC parts
103 parts0BSD - 2 layers248.3 × 147.3 mm

PCB BOARD DESIGN FOR IOT ENABLED WEARABLE HEALTH MONITOR
NITHYAR2005/PCB-BOARD-DESIGN-FOR-IOT-ENABLED-WEARABLE-HEALTH-MONITOR
9 parts - 4 layers100 × 100 mm

SDR TRX
frohro/SDR-TRX
SDR-TRX is an experimental low-cost digital mode ham radio HF transceiver.
141 parts14