Skip to the content
2 layers88.9 × 55.9 mmRom burner, the printed circuit board in 3D

Schematics and PCB designs of cartridges for MSX systems

Size
88.9 × 55.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
59
Pads
135
Tracks, vias
409, 27
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
30 Dec 2015
Updated
19 Jul 2024

Overview

Rom burner is an open-source printed circuit board by apoloval, from the apoloval/msx-cartridge repository on GitHub. It is a 2-layer board of 88.9 × 55.9 mm with 11 parts on 59 nets, routed with 409 tracks and 27 vias.

It is built around the 74HC595. Its parts include 6 ICs and 5 capacitors. It belongs with the retro computing and games boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

MSX Cartridge

Some hardware specs (schematics + PCB designs) to build cartridges for MSX system.

This PCB can be used to mimic old cartridges for the MSX system. It will fit any ROM dump <64kb. Dumps larger than 64kb need a mapper, not implemented in this version.

EPROM supported is the SST39 family that can be bought for around 1.5€. This EPROM can be programmed with a standard TL866 programmer.

image

image

image

Parts

11
QtyValueFootprintReferences
5100nFCapacitors_ThroughHole:C_Rect_L7_W2.5_P5C1, C2, C3, C4, C5
374HC595Housings_DIP:DIP-16_W7.62mmU1, U2, U4
14021Housings_DIP:DIP-16_W7.62mmU5
1Arduino_Uno_shieldarduino_uno_shieldU6
1SST39SF010/20/40Housings_DIP:DIP-32_W15.24mmU3

More from apoloval/msx-cartridge

2
  • 2 layers81.3 × 65.3 mmRom128k, the printed circuit board in 3D

    Rom128k

    apoloval/msx-cartridge

    Schematics and PCB designs of cartridges for MSX systems

    9 parts60
  • 2 layers81.3 × 65.3 mmCartridge breakout, the printed circuit board in 3D

    Cartridge breakout

    apoloval/msx-cartridge

    Schematics and PCB designs of cartridges for MSX systems

    2 parts60

Similar boards

  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers228.6 × 100 mmMongus48, the printed circuit board in 3D

    Mongus48

    ChrisChrisLoLo/beyblock20

    The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

    124 parts335GPL-3.0
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers100 × 95.1 mmProtoboard-6x4-breakout, the printed circuit board in 3D

    Protoboard-6x4-breakout

    electroniceel/protoboard

    Advanced protoboard layout with 1.27mm pitch for smd parts

    4,745 parts311CC-BY-4.0
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188
  • 2 layers100 × 100 mmTommyPROM32-595, the printed circuit board in 3D

    TommyPROM32-595

    TomNisbet/TommyPROM

    Simple Arduino-based EEPROM programmer

    36 parts187

Questions

How big is the Rom burner PCB?

It measures 88.9 × 55.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rom burner use?

11 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rom burner KiCad files?

From the apoloval/msx-cartridge repository on GitHub, at the commit this page was made from: the board is rom-burner/pcb/rom-burner.kicad_pcb and its schematic cartridge-breakout/cartridge-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rom burner design in my own project?

Its repository states no licence, so its author keeps all rights: ask apoloval before reusing the design.