2 layers30 × 58 mm
2 layers53.6 × 53.7 mm
PCB power
ApolLO-CanSat/PCB-powerpcb that will provide power for our cansat
- Size
- 53.6 × 53.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 15
- Pads
- 85
- Tracks, vias
- 240, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Feb 2026
- Updated
- 25 Feb 2026
Overview
PCB power is an open-source printed circuit board by ApolLO-CanSat, from the ApolLO-CanSat/PCB-power repository on GitHub. It is a 2-layer board of 53.6 × 53.7 mm with 26 parts on 15 nets, routed with 240 tracks and 2 vias.
It is built around the LM1117DT-5.0 and IRF7303. Its parts include 12 connectors, 7 resistors, 4 ICs, 2 transistors and 1 capacitor.
Main components
2
LM1117DT-5.0
TO-2520.003%Vout 0℃~+125℃@(Tj) 1 1.3V@(800mA) 10mA 15V 5V 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRF7303
SOP-8MOSFETsTECH PUBLIC
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R9, R10 |
| 2 | Conn_01x02_Socket | ark:TerminalBlock_bornier-2_P5.08mm | J2, J3 |
| 2 | LM1117DT-5.0 | Package_TO_SOT_SMD:TO-252-2 | U1, U3 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | IRF7104 | Package_TO_SOT_SMD:IRF7104 | U4 |
| 1 | IRF7303 | Package_TO_SOT_SMD:IRF7303 | U2 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | PMOS | Package_TO_SOT_SMD:TO-252-2 | Q4 |
Questions
How big is the PCB power PCB?
It measures 53.6 × 53.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB power use?
26 parts, built around the LM1117DT-5.0 and IRF7303. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB power KiCad files?
From the ApolLO-CanSat/PCB-power repository on GitHub, at the commit this page was made from: the board is pcb-power.kicad_pcb and its schematic pcb-power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB power design in my own project?
Its repository states no licence, so its author keeps all rights: ask ApolLO-CanSat before reusing the design.
Similar boards
- 2 layers33 × 39.5 mm
- 2 layers106.7 × 58.4 mm
- 2 layers60 × 50 mm
OmetakJednodussi
matuhac/Ometak
Cílem projektu je navrhnout jednoduchou řídící desku pro včelařský ometák.
22 parts - 2 layers85.8 × 94.2 mm
Fault Latch 2
LSUTigerRacing/Electronics
This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.
123 parts8 - 2 layers78 × 84 mm
- 2 layers87.2 × 175.3 mm
Y6502
SunnyYoshimitsu/HTC64
Think Ben Eater's 6502 but modified....a modified BE6592...the Y!6502....
63 parts5 - 2 layers100 × 100 mm
ENRTENADOR ATMEGA1284P
iSebass/MicrocontroladoresTeoria-Practicas
Este repositorio ha sido creado como un recurso de apoyo para el curso de Microcontroladores impartido en la Universidad del Valle. En este espacio colaboraremos con el Dr. en Ingeniería Sergio Arenas y el Ing.
149 parts1