

Shield offset
- Size
- 83.2 × 78.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 91
- Pads
- 435
- Tracks, vias
- 680, 155
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Feb 2024
- Updated
- 2 Jul 2026
Overview
Shield offset is an open-source printed circuit board by apmarshall3, from the apmarshall3/general-purpose-robotics-shield repository on GitHub. It is a 4-layer board of 83.2 × 78.1 mm with 125 parts on 91 nets, routed with 680 tracks and 155 vias.
It is built around the LMV358, ARDUINO UNO R3 and L298P, with the LMV331TP, MCT1117C-5.0-TP and SS14 among its other parts. Its parts include 37 diodes, 29 resistors, 22 capacitors, 12 connectors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational AmplifierARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedL298P
ZIP-152 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHSHANSCHIP semiconductorStepper Motor DriverLMV331TP
SOT-23-5-55℃~+125℃ 0.8uV/℃ 1 1.8V~5.5V 1pA 2pA 50uA 7V 800uV 950ns Open-drain Rail-to-rail input SOT-23-5 Comparators ROHSTECH PUBLICComparatorsMCT1117C-5.0-TP
SOT-223-40℃~+85℃@(Ta) 0.005%Vout 1 1.4V@(1A) 1A 30V 5V 62dB@(1kHz) Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicro Commercial ComponentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesCDBW140-G
SOD-123-55℃~+125℃ 1 Independent 1A 1mA@40V 40V 600mV@1A 9A SOD-123 Schottky Diodes ROHSComchipSchottky DiodesSSM3J356R,LF
SOT-23F1 P-Channel 1W 25pF 2A 2V 330pF 400mΩ@4V 40pF 60V 8.3nC@10V P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETsUS1G
SMA-55℃~+150℃ 1 Independent 1.3V@1A 1A 30A 400V 50ns 5uA SMA Fast Recovery / High Efficiency Diodes ROHSShunYeFast Recovery / High Efficiency Diodes2N7002DWK
SOT-363SOT-363 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 14 | D_Zener | Diode_SMD:D_SOD-123 | D23, D26, D28, D30, D32, D34, D36, D38, D40, D42, D44, D46, D48, D50 |
| 14 | R | Resistor_SMD:R_0805_2012Metric | R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29 |
| 8 | SS14 | Diode_SMD:D_SMA | D8, D9, D11, D12, D13, D14, D15, D16 |
| 6 | 0 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15 |
| 6 | CDBW140-G | Diode_SMD:D_SOD-123 | D1, D2, D3, D5, D6, D7 |
| 6 | NL | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C19, C20, C21, C22 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D17, D18, D19, D20 |
| 3 | SSM3J356R | Package_TO_SOT_SMD:SOT-23-3 | Q3, Q5, Q6 |
| 3 | US1G | Diode_SMD:D_SMA | D4, D21, D63 |
| 2 | 0R15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN3 |
| 2 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN2, RN4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1, A2 |
| 2 | ENC1 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J7, J9 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10u | Capacitor_SMD:CP_Elec_6.3x5.7 | C5 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2K5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 2N7002DWK | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | Q2 |
| 1 | 4077 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 5V | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10 |
| 1 | ADC | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J1 |
| 1 | APA102 | LED_SMD:LED_RGB_5050-6 | D22 |
| 1 | BATT | Ricks:Amass_XT60PW-M_Kombifootprint | J2 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal | F1 |
| 1 | I2C | footprints:Molex_KK-254_1x04_P2.54mm_Horizontal | J10 |
| 1 | L298P | footprints:SOIC127P1420X360-21N | U3 |
| 1 | LMV331 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U4 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MCT1117C-5.0-TP | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | PWR SW | Button_Switch_THT:SW_E-Switch_EG2219_DPDT_Angled | SW1 |
| 1 | Power OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J13 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | SERVO3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | SERVO4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm | SW2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J4 |
| 1 | ULTRA | footprints:Molex_KK-254_1x04_P2.54mm_Horizontal | J6 |
More from apmarshall3/general-purpose-robotics-shield
1- 2 layers83.2 × 69.2 mm

Similar boards
- 2 layers100 × 88 mm

- 2 layers50.8 × 76.2 mm

Breadboard-2
bicknell/DCC-Mobile-Decoder
DCC Mobile Decoder Reference Implementation Hardware & Software
75 parts14 - 2 layers59.3 × 34.1 mm

Motor driver
dknueppe/motor-driver-embedded-software
Motortreiber und zugehörige Software entwickelt für das Modul Embedded Software an der FH-Münster
29 parts - 4 layers129 × 104.6 mm

- 4 layers150 × 120 mm

Ephys test board
open-ephys/ephys-test-board
General purpose, automated electrophysiology test board
567 parts1 - 6 layers177.8 × 168.9 mm

LogicBoard smt
clydeshaffer/gametank
design files for the gametank hardware implementation
225 parts150 - 4 layers45.2 × 70.6 mm

- 4 layers100 × 60 mm

Questions
How big is the Shield offset PCB?
It measures 83.2 × 78.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Shield offset use?
125 parts, built around the LMV358, ARDUINO UNO R3, L298P and LMV331TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shield offset KiCad files?
From the apmarshall3/general-purpose-robotics-shield repository on GitHub, at the commit this page was made from: the board is PCB_V2/Shield_offset.kicad_pcb and its schematic PCB_V1/Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shield offset design in my own project?
Its repository states no licence, so its author keeps all rights: ask apmarshall3 before reusing the design.