

Repetidor
- Size
- 30 × 41.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 40
- Pads
- 166
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 May 2025
- Updated
- 3 Nov 2025
Overview
Repetidor is an open-source printed circuit board by apemangr, from the apemangr/Diseno-Repetidor repository on GitHub. It is a 2-layer board of 30 × 41.1 mm with 59 parts on 40 nets.
It is built around the IRLML6344TRPBF and STLQ015M30R. Its parts include 23 resistors, 16 capacitors, 10 connectors, 4 ICs and 2 diodes.
Main components
2IRLML6344TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC 650pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsSTLQ015M30R
SOT-23-5L-40℃~+125℃@(Tj) 1 1.4uA 150mA 300mV@(150mA) 3V 40dB@(1kHz) 5.5V 75uVrms Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdDiseno-Repetidor
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47uf | footprints:GRM18x | C9, C10, C11, C12, C15, C16, C17, C18 |
| 8 | 6.2k | footprints:RESC1005X40N | R3, R4, R11, R12, R13, R18, R19, R20 |
| 8 | Conn_01x02 | footprints:CONN02_530470210_MOL | CON1, CON2, CON3, CON4, CON5, CON6, CON7, CON8 |
| 7 | 10k | footprints:RESC1005X40N | R8, R14, R15, R16, R17, R23, R26 |
| 4 | 1uf | footprints:CAPC1005X55N | C1, C2, C3, C4 |
| 3 | 1k | footprints:RESC1005X40N | R9, R22, R25 |
| 2 | 0.1uf | footprints:CAPC1005X55N | C5, C6 |
| 2 | 4.7uf | footprints:CAP_GMC04_CCE | C7, C8 |
| 2 | 70 | footprints:RESC1005X40N | R21, R24 |
| 2 | IRLML6344TRPBF | footprints:SOT95P240X112-3N | IC1, IC2 |
| 2 | LED | LED_SMD_CUSTOM:LED0805-R-RD | LED1, LED2 |
| 1 | 0k | footprints:RESC1005X40N | R10 |
| 1 | 2.4M | footprints:RESC1005X40N | R2 |
| 1 | 6.2M | footprints:RESC1005X40N | R1 |
| 1 | AD5593R | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | Conn_01x02 | TA-3514-A1-B:TA-3514-A1-B | SWT1 |
| 1 | Conn_01x02 | footprints:533980271 | CON10 |
| 1 | Conn_01x04 | footprints:8518700420001101 | CON9 |
| 1 | STLQ015M30R | footprints:SOT95P280X145-5N | LDO1 |
| 1 | SW_Push | K2-1109SP-G4SA-04:K2-1109SP-G4SA-04 | B1 |
| 1 | TLV70012_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ~ | HOLYIOT_MCU:Holyiot_YJ17029 | HOLYIOT_1 |
Similar boards
- 2 layers57.3 × 41.2 mm

- 2 layers149.6 × 127.1 mm

- 2 layers100 × 50 mm

- 2 layers65.3 × 18.3 mm

Klipper nano expander
orobardet/klipper_nano_expander
Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
39 parts35MIT - 2 layers79.7 × 62.6 mm

OpenReflow
CarlosGS/OpenReflow
Simple reflow oven controller that is configurable from a phone
39 parts25GPL-3.0 - 2 layers35 × 50 mm

Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
76 parts7MIT - 4 layers36 × 36 mm

Vapeagochi
lucia3e8/vapeagochi
Eventually I want to target the bc5000 because it's cuter but I'd have to redesign the PCB
50 parts5 - 2 layers65 × 65 mm

LMR14050SDDA reference
luxas/special-computing-machine
Let's make a Raspberry Pi cluster similar to real data centers!
49 parts5Apache-2.0
Questions
How big is the Repetidor PCB?
It measures 30 × 41.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Repetidor use?
59 parts, built around the IRLML6344TRPBF and STLQ015M30R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Repetidor KiCad files?
From the apemangr/Diseno-Repetidor repository on GitHub, at the commit this page was made from: the board is Repetidor.kicad_pcb and its schematic Repetidor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Repetidor design in my own project?
Its repository states no licence, so its author keeps all rights: ask apemangr before reusing the design.