
Dolphins
apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware
Spiders is an open-source printed circuit board by apaleslimghost, from the apaleslimghost/synths repository on GitHub. It is a 2-layer board of 43.2 × 110.4 mm with 93 parts on 129 nets, routed with 693 tracks and 59 vias.
It is built around the TMUX8212PW. Its parts include 40 resistors, 14 capacitors, 12 connectors, 8 ICs and 8 diodes.
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware. these can be viewed on CADLAB.io.
pcbdraw populatekikitunless otherwise specified:
generally, that means you can use, edit, and make things in this repository, but please share the source if you do.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R10, R11, R12, R13, R15, R16, R17, R18, R19, R20, R21, R23, R24, R25 +12 |
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 8 | AudioJack2_SwitchT | Pale Slim Ghost:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 8 | D | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | R | Resistor_SMD:R_0805_2012Metric | R33, R34, R35, R36, R37, R38, R39, R40 |
| 8 | SW_Push_LED | Pale Slim Ghost:PB01-109TL | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R6, R14, R22, R30 |
| 4 | TMUX8212 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2, U4, U6, U8 |
| 3 | TL074 | Pale Slim Ghost:TSOT-23-14 | U1, U3, U5 |
| 2 | Mousebite | Pale Slim Ghost:mousebite-2.54x5.08mm | B3, B4 |
| 1 | Chordata | Pale Slim Ghost:Chordata | U10 |
| 1 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J11 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J12 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1 |

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.



Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
It measures 43.2 × 110.4 mm and has 2 copper layers, 1.6 mm thick.
93 parts, built around the TMUX8212PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the apaleslimghost/synths repository on GitHub, at the commit this page was made from: the board is eurorack/modules/spiders/spiders.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask apaleslimghost before reusing the design.