
Dolphins
apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware
Bats is an open-source printed circuit board by apaleslimghost, from the apaleslimghost/synths repository on GitHub. It is a 2-layer board of 30.5 × 65 mm with 31 parts on 18 nets, routed with 122 tracks and 9 vias.
It is built around the TL072, 74LVC1G74GT and MIC5219-3.3YM5, with the TMUX6219DGK among its other parts. Its parts include 8 capacitors, 5 resistors, 4 ICs, 3 connectors and 2 diodes.
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware. these can be viewed on CADLAB.io.
pcbdraw populatekikitunless otherwise specified:
generally, that means you can use, edit, and make things in this repository, but please share the source if you do.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C5, C6 |
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C3, C7 |
| 2 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | AudioJack2_SwitchT | Pale Slim Ghost:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J2, J3 |
| 2 | LOGO | LOGO | G1, G2 |
| 2 | MountingHole | Pale Slim Ghost:eurorack panel mounting slot | H1, H2 |
| 2 | MountingHole | Pale Slim Ghost:hole 6mm (jack panel) | H3, H4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1u tant | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C8 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 74LVC1G74 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MountingHole | Pale Slim Ghost:hole 6.5mm (potentiometer panel) | H5 |
| 1 | Mousebite | Pale Slim Ghost:mousebite-2.54x5.08mm | B1 |
| 1 | R_Potentiometer_PushSwitch | Pale Slim Ghost:PRS11R Momentary Switch Potentiometer | RV1 |
| 1 | TL072 | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U1 |
| 1 | TMUX6219 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U2 |
| 1 | blue | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware




PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf


relic-se/PicoSynth_Sandbox-hardware
Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.

luni64/mmStep
Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.
It measures 30.5 × 65 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the TL072, 74LVC1G74GT, MIC5219-3.3YM5 and TMUX6219DGK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the apaleslimghost/synths repository on GitHub, at the commit this page was made from: the board is eurorack/modules/bats/bats.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask apaleslimghost before reusing the design.