

FM01-ES2-1
胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.
- Size
- 20 × 32 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 27
- Nets
- 52
- Pads
- 154
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jan 2021
- Updated
- 30 Dec 2020
Overview
FM01-ES2-1 is an open-source printed circuit board by apachecn, from the apachecn/fm01 repository on GitHub. It is a 2-layer board of 20 × 32 mm with 27 parts on 52 nets.
It is built around the ESP32-S2-WROVER-I(4M). Its parts include 14 resistors, 6 capacitors, 4 connectors, 2 diodes and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdParts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | Resistor_SMD:R_0402_1005Metric | R4, R10, R11, R35, R36 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R30, R31, R32, R33 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R18, R34 |
| 2 | 15 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 20p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | Conn_01x10 | Connector_Hirose:Hirose_DF13C_CL535-0410-4-51_1x10-1MP_P1.25mm_Vertical | J2, J3 |
| 1 | 22u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | Conn_01x30 | Connector_FFC-FPC:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J4 |
| 1 | ESP32-S2-WROVER-I | RF_Module:ESP32-S2-WROVER | U1 |
| 1 | LED-B | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LED-G | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
More from apachecn/fm01
6- 2 layers20 × 50 mm

- 2 layers48 × 48 mm

- 2 layers17 × 50 mm

- 2 layers14 × 21 mm

- 2 layers60 × 60 mm

- 2 layers16 × 4 mm

Similar boards
- 2 layers82.5 × 140 mm

QCamPCR
GaudiLabs/qPocketPCR
Quantitative PCR machine detecting fluorescence using a camera
113 parts22GPL-3.0 - 2 layers81 × 59 mm

Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22 - 2 layers56.2 × 53.3 mm

- 6 layers90 × 90 mm

Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0 - 2 layers40 × 43 mm

- 2 layers40 × 40 mm

Esp32Drone
HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor
83 parts2 - 2 layers100 × 100 mm

ESP32S2 MIDI
jildertviet/ESP32S2_MIDI_controller
ESP32S2 based MIDI controller with 5 sliders
29 parts2 - 2 layers133.8 × 95.4 mm

Questions
How big is the FM01-ES2-1 PCB?
It measures 20 × 32 mm and has 2 copper layers, 1 mm thick.
What parts does the FM01-ES2-1 use?
27 parts, built around the ESP32-S2-WROVER-I(4M). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FM01-ES2-1 KiCad files?
From the apachecn/fm01 repository on GitHub, at the commit this page was made from: the board is doc/kicad/fm01-es2-1/FM01-ES2-1/FM01-ES2-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FM01-ES2-1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask apachecn before reusing the design.