

Designs for Z80-family circuit boards
- Size
- 83.8 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 96
- Pads
- 348
- Tracks, vias
- 1,266, 44
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Sep 2018
- Updated
- 9 Sep 2018
Overview
Z180 is an open-source printed circuit board by anyahelene, from the anyahelene/z80pcb repository on GitHub. It is a 2-layer board of 83.8 × 53.3 mm with 62 parts on 96 nets, routed with 1,266 tracks and 44 vias.
It is built around the 74HCT138D, AS6C1008-55PCN and DS1813-5+. Its parts include 16 capacitors, 9 connectors, 6 resistors, 5 ICs and 1 diode.
Main components
374HCT138D
SO-16-40℃~+125℃ 160uA 20ns@4.5V,50pF 3/8 4.5V~5.5V 4mA 4mA 74HCT Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / MultiplexersAS6C1008-55PCN
PDIP-320℃~+70℃ 1Mbit 1uA 2.7V~5.5V 55ns 60mA PDIP-32 SRAM ROHSAlliance MemorySRAMDS1813-5+
TO-92-3-40℃~+85℃@(Ta) 1 1.2V~5.5V 150ms 4.75V Active Low No Open Drain Voltage Monitor Yes TO-92-3 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICs
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1µF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C5, C6, C9, C12, C13, C15, C16, C18, C20 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R9, R10, R11 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | MH1, MH3, MH4 |
| 2 | 10k x4 | Resistor_SMD:R_Array_Convex_4x1206 | RN1, RN2 |
| 2 | 22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C4 |
| 2 | 74HCT138 | Package_DIP:DIP-16_W7.62mm | U1, U4 |
| 2 | SolderJumper_2_Bridged | NetTie:NetTie-2_SMD_Pad0.5mm | JP1, JP2 |
| 1 | 0.01µF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 10µF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C10 |
| 1 | 1µF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C19 |
| 1 | 1µF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C11 |
| 1 | 22R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
| 1 | 28C256 | z180:DIP-28_Piggyback_Memory_W15.24mm_Socket | U2 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | 650mA | Fuse:Fuse_Littlefuse_395Series | F1 |
| 1 | AS6C1008-55PCN | Package_DIP:DIP-32_W15.24mm_Socket | U3 |
| 1 | BUSCTRL | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J10 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J8 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | DS1813 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U5 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | oshw1 |
| 1 | M2 | MountingHole:MountingHole_2.2mm_M2 | MH2 |
| 1 | MEM_ADDR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | POWER_IN | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J7 |
| 1 | PWR_LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | SERIAL_IO | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | STATUS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SYM_Flash_Small | z180:bird | bird1 |
| 1 | SYM_Flash_Small | z180:discovery | discovery1 |
| 1 | TST_CPU_GND | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP1 |
| 1 | TST_CPU_VCC | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP2 |
| 1 | TST_D0 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP9 |
| 1 | TST_E | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4 |
| 1 | TST_PHI | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP3 |
| 1 | TST_RAMRQ | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7 |
| 1 | TST_RFSH | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP10 |
| 1 | TST_ROMRQ | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP8 |
| 1 | USB Micro-B 105017 | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | USB_DATA | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J6 |
| 1 | Z8S180 | Package_LCC:PLCC-68_THT-Socket | CPU1 |
| 1 | bird_logo | z180:bird | bird1 |
| 1 | discovery_logo | z180:discovery | discovery1 |
| 1 | zdbus | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers99.8 × 99.8 mm

- 4 layers100 × 100 mm

- 2 layers127 × 127 mm

Morseboard-8088
ifilot/morseboard-8088
Single board computer designed around the 8088 processor
61 parts - 2 layers99.1 × 88.9 mm

1002 EPROM EMU NG 2.2d
Kris-Sekula/EPROM-EMU-NG
EPROM Emulator Project with Arduino
49 parts161Apache-2.0 - 2 layers357.8 × 124.5 mm

Vic2020mainboard
danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts
142 parts78 - 2 layers99.7 × 80 mm

- 4 layers170.1 × 170.1 mm

Questions
How big is the Z180 PCB?
It measures 83.8 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Z180 use?
62 parts, built around the 74HCT138D, AS6C1008-55PCN and DS1813-5+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Z180 KiCad files?
From the anyahelene/z80pcb repository on GitHub, at the commit this page was made from: the board is z180.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Z180 design in my own project?
Its repository states no licence, so its author keeps all rights: ask anyahelene before reusing the design.