
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

Myboard is an open-source printed circuit board by anurag3301, from the anurag3301/myboard repository on GitHub. It is a 2-layer board of 40.7 × 59.1 mm with 50 parts on 54 nets, routed with 298 tracks and 23 vias.
It is built around the STM32F103C8T6 and AMS1117-3.3. Its parts include 13 capacitors, 12 resistors, 9 diodes, 9 connectors and 3 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1.5K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R5, R6, R7, R8, R9, R10, R11, R12 |
| 9 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C4, C5, C6, C7, C11, C13 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C8, C12 |
| 2 | 3.3V Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | 33p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10 |
| 2 | 5V Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2, SW3 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | I2C2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | LOGO | LOGO | G*** |
| 1 | SPI2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | USART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.


minhle4397/Line-Follower-Robot-v2
Improved Hardware and Firmware for Line Follower Robot

mupfdev/TrackMAG
An open hardware development board primarily intended for the development of accessible input devices.

RaduAndre/DeskMixer
DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.

abda-s/STM32-Phill-s-Lab-PCB-Course
A beginner-friendly introduction to STM32 hardware design and KiCad

It measures 40.7 × 59.1 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the STM32F103C8T6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anurag3301/myboard repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask anurag3301 before reusing the design.