Skip to the content
2 layers40.7 × 59.1 mmMyboard, the printed circuit board in 3D
Size
40.7 × 59.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
54
Pads
174
Tracks, vias
298, 23
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 Jan 2026
Updated
20 Mar 2026

Overview

Myboard is an open-source printed circuit board by anurag3301, from the anurag3301/myboard repository on GitHub. It is a 2-layer board of 40.7 × 59.1 mm with 50 parts on 54 nets, routed with 298 tracks and 23 vias.

It is built around the STM32F103C8T6 and AMS1117-3.3. Its parts include 13 capacitors, 12 resistors, 9 diodes, 9 connectors and 3 switches. It belongs with the STM32 boards of this library.

Main components

2

Parts

50
QtyValueFootprintReferences
91.5KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R5, R6, R7, R8, R9, R10, R11, R12
9LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2, D3, D4, D5, D6, D7, D8, D9
8100nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C3, C4, C5, C6, C7, C11, C13
310uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C8, C12
23.3V PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J3
233pCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC9, C10
25V PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6, J7
2RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R4
2SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW2, SW3
110kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
18MHzCrystal:Crystal_SMD_HC49-SDY1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1GPIOConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1I2C2Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1LOGOLOGOG***
1SPI2Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1SW_PushButton_Switch_SMD:SW_SPST_PTS647_Sx38SW1
1USART1Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9

Similar boards

  • 2 layers68 × 40 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    44 parts170CC0-1.0
  • 2 layers99.1 × 58.4 mmHEAT, the printed circuit board in 3D

    HEAT

    milar111/HEAT

    An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.

    57 parts9
  • 2 layers71.3 × 25.4 mmUSB DALI, the printed circuit board in 3D

    USB DALI

    even-notodd/USB-DALI

    USB-DALI interface converter

    43 parts4
  • 2 layers78 × 60 mmDC Motor Controller, the printed circuit board in 3D

    DC Motor Controller

    minhle4397/Line-Follower-Robot-v2

    Improved Hardware and Firmware for Line Follower Robot

    53 parts3
  • 4 layers36 × 36 mmTrackMAG, the printed circuit board in 3D

    TrackMAG

    mupfdev/TrackMAG

    An open hardware development board primarily intended for the development of accessible input devices.

    58 parts3
  • 2 layers154.7 × 113 mmDeskMixer, the printed circuit board in 3D

    DeskMixer

    RaduAndre/DeskMixer

    DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.

    113 parts3
  • 2 layers42 × 33 mmSTM32 course, the printed circuit board in 3D

    STM32 course

    abda-s/STM32-Phill-s-Lab-PCB-Course

    A beginner-friendly introduction to STM32 hardware design and KiCad

    32 parts2
  • 2 layers53.3 × 35.6 mmStm32 minimal dev, the printed circuit board in 3D

    Stm32 minimal dev

    amrithHN/stm32_minimal_dev

    stm32 based minimal dev board

    33 parts2GPL-3.0

Questions

How big is the Myboard PCB?

It measures 40.7 × 59.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Myboard use?

50 parts, built around the STM32F103C8T6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Myboard KiCad files?

From the anurag3301/myboard repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Myboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask anurag3301 before reusing the design.