Skip to the content
2 layers140 × 72 mmTrice horse, the printed circuit board in 3D

look at my horse, it is blinking, give it a lake

Size
140 × 72 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
37
Pads
170
Tracks, vias
311, 40
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Jun 2021
Updated
27 Jun 2021

Overview

Trice horse is an open-source printed circuit board by antonloof, from the antonloof/trice_horse repository on GitHub. It is a 2-layer board of 140 × 72 mm with 51 parts on 37 nets, routed with 311 tracks and 40 vias.

It is built around the STM8L101F3P6, ESP-WROOM-02 and RT8097AHGB, with the PCA9552D among its other parts. Its parts include 16 diodes, 9 resistors, 8 capacitors, 5 ICs and 3 connectors. It belongs with the STM8 boards of this library.

Main components

4

README

README.md

trice_horse

look at my horse, it is blinking, give it a lake

Parts

51
QtyValueFootprintReferences
16LED_REDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
522uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2, C4, C5, C8
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC3, C6, C7
33k3Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR5, R6, R7
210kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR8, R9
21u5Inductor_SMD:L_Wuerth_WE-PD-Typ-7345L1, L2
2RT8097AHGBPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU1, U3
1100@100MhzInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderFB1
120kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2
124kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR4
1500maFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
176kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
190kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ1
1Conn_01x06good_things:TSM-106-01-L-SHJ3
1ESP-WROOM-02RF_Module:ESP-WROOM-02U5
1PCA9552Package_SO:TSSOP-24_4.4x7.8mm_P0.65mmU4
1Q_PMOS_GSDPackage_TO_SOT_SMD:SOT-23_HandsolderingQ1
1STM8L101F3PPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1SW_Pushgood_things:push_sw_purpleSW1
1swimgood_things:TSM-104-01-L-SHJ2

Similar boards

  • 2 layers44.2 × 26 mmBinuhr tiny, the printed circuit board in 3D

    Binuhr tiny

    antonloof/binuhr_tiny

    a small binary clock, so cute <3

    52 parts
  • 2 layers71 × 37 mmAttiny10clock, the printed circuit board in 3D

    Attiny10clock

    antonloof/attiny10clock

    How to not make a clock.

    41 parts
  • 2 layers68 × 35.3 mmBike ometer, the printed circuit board in 3D

    Bike ometer

    antonloof/bike_ometer

    Bike go brrr

    60 parts
  • 2 layers35.5 × 20 mmBake, the printed circuit board in 3D

    Bake

    eddyem/STM8_samples

    Some code samples and ready projects based on STM8 (deprecated)

    11 parts80
  • 2 layers105 × 42 mmController, the printed circuit board in 3D

    Controller

    antonloof/eta_game_system

    testing to drive tls3001 leds with a pico

    47 parts
  • 2 layers13.7 × 21.4 mmZ2m partner, the printed circuit board in 3D

    Z2m partner

    smarthomefans/z2m_partner

    Hardware module for iobroker.zigbee

    52 parts186
  • 2 layers41.3 × 87.1 mmUnified smd pcb, the printed circuit board in 3D

    Unified smd pcb

    Al-Nafuur/United-Carts-of-Atari

    Firmware for PlusCart and UnoCart

    22 parts45GPL-3.0

Questions

How big is the Trice horse PCB?

It measures 140 × 72 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Trice horse use?

51 parts, built around the STM8L101F3P6, ESP-WROOM-02, RT8097AHGB and PCA9552D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Trice horse KiCad files?

From the antonloof/trice_horse repository on GitHub, at the commit this page was made from: the board is kicad/kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Trice horse design in my own project?

Its repository states no licence, so its author keeps all rights: ask antonloof before reusing the design.