2 layers150 × 180 mm
2 layers84.9 × 48.5 mm
Power distribution
antek042/learnbot- Size
- 84.9 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 5
- Pads
- 26
- Tracks, vias
- 42, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Aug 2026
- Updated
- 8 Aug 2026
Overview
Power distribution is an open-source printed circuit board by antek042, from the antek042/learnbot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 84.9 × 48.5 mm with 13 parts on 5 nets, routed with 42 tracks and 0 vias.
It is built around the XT30UPB-M and XT60-M. Its parts include 1 connector and 1 switch.
Main components
2README
README.mdlearnbot
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | XT30UPB-M | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | ENCODER_1, ENCODER1, MOTOR_1, MOTOR_2, RPI1 |
| 1 | Conn_01x04_Socket | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm | SparkFunCOM-18356 |
| 1 | Pololu 2851 | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm | Pololu 2851 |
| 1 | SW_SPST | Connector_Wire:SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm | SW1 |
| 1 | XT60-M | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
The 9 most common of 13 parts.
Questions
How big is the Power distribution PCB?
It measures 84.9 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power distribution use?
13 parts, built around the XT30UPB-M and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power distribution KiCad files?
From the antek042/learnbot repository on GitHub, at the commit this page was made from: the board is pcbs/power-distribution/power-distribution/power-distribution.kicad_pcb and its schematic pcbs/power-distribution/power-distribution/power-distribution.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power distribution design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers60 × 40 mm
- 2 layers214 × 187.9 mm
Line follower simple
alientanya/line-follower-PCB
A modular PCB platform for Fast Line Follower (FLF) robots, designed to prioritize sensor experimentation and component flexibility.
259 parts2MIT - 4 layers135 × 84 mm
Stepper with TMC2209 controller board V1
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
95 parts2 - 4 layers88.9 × 57.8 mm
- 4 layers70 × 70 mm
- 4 layers101 × 51.5 mm
Quack core
HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.
138 parts1CERN-OHL-S-2.0 - 2 layers50 × 35 mm
M5stack board unitree brushless digital servo
kim-xps12/m5stack_board_unitree_brushless_digital_servo
Unitree Servo UART Board for M5Stack: auto-direction 4 Mbps half-duplex TTL bus for Unitree J288 / S288 brushless digital servos (KiCad 9, JLCPCB PCBA)
29 parts1MIT