6 layers160 × 100 mm
2 layers33 × 34 mm
Tempsensor esp01
anna328p/tempsensor_esp01tempsensor_esp01
- Size
- 33 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 23
- Pads
- 103
- Tracks, vias
- 261, 65
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Nov 2022
- Updated
- 19 Nov 2022
Overview
Tempsensor esp01 is an open-source printed circuit board by anna328p, from the anna328p/tempsensor_esp01 repository on GitHub. It is a 2-layer board of 33 × 34 mm with 29 parts on 23 nets, routed with 261 tracks and 65 vias.
It is built around the CH340E, DPS310 and SHT40-AD1B-R2, with the XC6206P332MR among its other parts. Its parts include 9 capacitors, 8 resistors, 5 ICs, 2 connectors and 2 switches. It belongs with the ESP8266 boards of this library.
Main components
4
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
DPS310
LGA-8(2x2.5)-40℃~+85℃ 0.5pa/K 1.7V~3.6V 100pa 27.6ms 30Kpa~1.2bar 500nA 6pa I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes LGA-8(2x2.5) Pressure Sensors ROHSInfineon TechnologiesPressure Sensors
SHT40-AD1B-R2
DFN-4-EP(1.5x1.5)Temperature And Humidity SensorSensirion
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C8, C9 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 47p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | SW_Push | ! TS-1187A-B-A-B:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | DPS310 | ! DPS310:XDCR_DPS310 | U3 |
| 1 | ESP-01v090 | ! ESP8266:ESP-01 | U1 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SHT40-AD1B-R2 | ! SHT40-AD1B-R2:XDCR_SHT40-AD1B-R2 | U2 |
| 1 | Stemma QT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U4 |
Questions
How big is the Tempsensor esp01 PCB?
It measures 33 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tempsensor esp01 use?
29 parts, built around the CH340E, DPS310, SHT40-AD1B-R2 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tempsensor esp01 KiCad files?
From the anna328p/tempsensor_esp01 repository on GitHub, at the commit this page was made from: the board is tempsensor_esp01.kicad_pcb and its schematic tempsensor_esp01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tempsensor esp01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask anna328p before reusing the design.
Similar boards
- 2 layers16.9 × 14.4 mm
Rs485-ch340e
TG9541/rs485-ch340e
A small CH340E based configurable RS485 or TTL 2/3-wire USB dongle
17 parts15MIT - 4 layers55.8 × 20 mm
- 4 layers9.7 × 17.9 mm
BeagleBark
Grippy98/Beagle-Serial-Adapter
A CH340E Based Minimalist USB-Serial Adapter for BeaglePlay, AI64 and More
19 partsGPL-3.0 - 4 layers46.9 × 68.1 mm
- 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0 - 4 layers34 × 40 mm
WingFC
BryanSouza91/WingFC
WingFC is an open-source embedded flight controller for sub-250g fixed-wing aircraft, built with TinyGo. It provides stabilization, mixing, and safety features for elevon-equipped models, with a focus on reliability and…
38 parts10MIT - 6 layers36 × 36 mm
