Skip to the content
2 layers64.8 × 38.1 mmESP RS232, the printed circuit board in 3D

Using the ESP8266 as a WiFi-to-RS232 adapter

Size
64.8 × 38.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
34
Pads
85
Tracks, vias
180, 0
Routed
Yes
KiCad
KiCad 4
Created
27 Mar 2015
Updated
27 Mar 2015

Overview

ESP RS232 is an open-source printed circuit board by anlumo, from the anlumo/ESP6288-RS232 repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 64.8 × 38.1 mm with 18 parts on 34 nets, routed with 180 tracks and 0 vias.

It is built around the MAX232N, ESP-07 and AMS1117-3.3. Its parts include 7 capacitors, 4 connectors, 4 switches and 2 ICs. It belongs with the radio and wireless boards and the ESP8266 boards of this library.

Main components

3

Parts

18
QtyValueFootprintReferences
5100nFCapacitors_SMD:C_0603_HandSolderingC3, C4, C5, C6, C7
110µFCapacitors_SMD:C_1206_HandSolderingC1
122µFCapacitors_SMD:C_0805_HandSolderingC2
1AMS1117-3.3SOT223:SOT223U1
1BARREL_JACKConnect:BARREL_JACKCON1
1DB9Connect:DB9FCJ1
1ESP-07ESP8266:ESP-07M1
1GPIO1Pin_Headers:Pin_Header_Straight_1x07P1
1GPIO2Pin_Headers:Pin_Header_Straight_1x04P2
1MAX232Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mmU2
1PIN2Pin_Headers:Pin_Header_Straight_1x03K1
1PIN3Pin_Headers:Pin_Header_Straight_1x03K2
1PROGRAMswitches:Push Button Switch 3.5X6SW2
1RESETswitches:Push Button Switch 3.5X6SW1

Similar boards

  • 2 layers27.5 × 28.4 mmTiny power meter, the printed circuit board in 3D

    Tiny power meter

    ezcGman/tiny-power-meter

    A very tiny 3-phase power meter to measure your homes power consumption and report to Home Assistant!

    19 parts5
  • 2 layers99.6 × 69.8 mm220VAC DHT11, the printed circuit board in 3D

    220VAC DHT11

    bestariweb/ioT

    26 parts1GPL-3.0
  • 2 layers75.3 × 86 mmRS485, the printed circuit board in 3D

    RS485

    Solderingironspb/ModbusRTU_Master_MQTT_Gateway

    Данное устройство выступает мастером сети ModbusRTU. Обменивается данными с подчиненными устройствами (до 247 устройств на линии RS485).

    67 parts1
  • 2 layers60.2 × 39.9 mmNodoVibraciones, the printed circuit board in 3D

    NodoVibraciones

    Mario-dango/VibraNet

    Proyecto de investigación sobre una red de nodos receptores de vibraciones mediante wifi

    33 partsMIT
  • 2 layers72 × 52 mmWaterLevelDetectorBatteryOp, the printed circuit board in 3D

    WaterLevelDetectorBatteryOp

    morynicz/WaterLevelDetector

    PCB for detection of remaining rainwater for garden watering.

    16 partsGPL-3.0
  • 2 layers98 × 68 mmNano X ESP V3, the printed circuit board in 3D

    Nano X ESP V3

    poypok/Nano-X-ESP

    PCB Desain IOT ATmega 328 and ESP chip

    52 parts
  • 2 layers99.5 × 99.5 mmPower tracking heaterP, the printed circuit board in 3D

    Power tracking heaterP

    kwiecinski/BMS-and-offgrid-photovoltaic-management-system

    Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.

    79 parts3MIT
  • 4 layers99.3 × 88.6 mmZ180-comp, the printed circuit board in 3D

    Z180-comp

    89Mods/misc-computers

    Misc microcomputer projects

    64 parts3MIT

Questions

How big is the ESP RS232 PCB?

It measures 64.8 × 38.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP RS232 use?

18 parts, built around the MAX232N, ESP-07 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP RS232 KiCad files?

From the anlumo/ESP6288-RS232 repository on GitHub, at the commit this page was made from: the board is ESP-RS232.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP RS232 design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).