Skip to the content
2 layers25 × 54 mmEcg, the printed circuit board in 3D

Project for an esp32-based biosignal reader and processor

Size
25 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
64
Pads
210
Tracks, vias
431, 51
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Jul 2026
Updated
21 Jul 2026

Overview

Ecg is an open-source printed circuit board by anemoijereja-eden, from the anemoijereja-eden/ecg repository on GitHub. It is a 2-layer board of 25 × 54 mm with 45 parts on 64 nets, routed with 431 tracks and 51 vias.

It is built around the ESP32-S3-WROOM-1-N8, AD8232ACPZ-R7 and MP2667GG-0000-P. Its parts include 21 resistors, 14 capacitors, 4 ICs, 4 connectors and 1 switch. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

E.D.E.N.Tech Open Source Hardware health telemetry system This project aims to bring the features of medical grade wireless telemetry systems to the people, making them vastly more compact and lowering costs significantly. Where the average medical grade device that does what this unit can costs hundreds of dollars and only supports proprietary EMR systems, this device uses commodity parts and is intended to connect to an open source telemetry system based on InfluxDB.

Current work completed:

  • Signal acquisition using an esp32-s3
  • Off device signal processing
  • first revision PCB design

To Do:

  • Move signal processing onto the device itself
  • enable device to report data over the network
  • finish PCB designs and create the actual device
  • create software solution for processing telemetry data on a recieving server
  • Look into other telemetry to integrate

Potential ideas:

  • non-invasive blood pressure monitor built more compact than ever before using a PCB motor, integrated cycloidal drive, and a membrane pump to create the full system at a pcb scale.
  • integration with implanted sensors via nfc

Tech Stack: The system is based around the AD8232 as an analog frontend, connected to an ESP32-S3 microcontroller to create a low cost platform using parts that are already widely used and accepted in open hardware. This repository contains an esp32 firmware, a kicad project under the "PCB" subdirectory, and the prototype off-device processing scripts in "plotter.py"

Parts

45
QtyValueFootprintReferences
610MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R9, R10, R11, R15, R16
30.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C8, C10
3100KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R5, R6
31MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19, R20, R21
20.33uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C12
2100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R18
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C5
2180kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR13, R14
25.1KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3
11.4MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR17
11.5nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC14
110nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13
110uHInductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolderL1
11kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
11nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC9
11pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
11uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3
12.2uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
1360KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR12
14.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6
1AD8232ACPZ-R7Library:CP_20_10_ADIU3
1BOOTButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U4
1JBATTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ2
1JECGConnector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ4
1Jspo2Connector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_HorizontalJ5
1LM3670MF-3.3/NOPBPackage_TO_SOT_SMD:TSOT-23-5U1
1MP2667GG-0000-PLibrary:QFN-10_2MMx2MM_MNPU2
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ3

Similar boards

  • 2 layers220 × 50 mmNeuroVox v2.0, the printed circuit board in 3D

    NeuroVox v2.0

    Swapnil007-Curious/NeuroVox-v2.0

    NeuroVox v2.0 is a conformal 220×50mm forearm wearable PCB. Powered by an ESP32-S3, it captures high-res 4-channel EMG via AD8232, INA333, and ADS1299 ICs using leadless, integrated dry Ag/AgCl edge electrodes.

    94 parts3
  • 4 layers99.5 × 56.5 mmEKG licenta, the printed circuit board in 3D

    EKG licenta

    AlexMirt2/EKG-signal-acquisition-and-processing-system

    The diploma project focuses on designing and implementing an ECG signal acquisition and processing system. It includes smart devices capable of transmitting data to the cloud.

    107 parts
  • 2 layers17.5 × 24.7 mmMy template, the printed circuit board in 3D

    My template

    nwasr/Stamp-Board-of-AD8232

    Compact AD8232 stamp board designed in KiCad v9 with schematic, PCB layout, Gerbers, BOM, and 3D view.

    23 parts2MIT
  • 2 layers26 × 40 mmNervous ECG, the printed circuit board in 3D

    Nervous ECG

    sensors-inl/Nervous-ECG

    ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.

    65 parts2MIT
  • 4 layers37.5 × 29.5 mmHM Collector Rev2, the printed circuit board in 3D

    HM Collector Rev2

    konstantinosfragkoulis/HealthMonitor

    Chest-worn STM32U5 sensor that records ECG and SCG, and computes HRV on-device. Bare metal C.

    91 parts1MIT
  • 2 layers27.9 × 37.6 mmMy template, the printed circuit board in 3D

    My template

    nwasr/SparkFun-AD8232-Replica

    KiCad v9 PCB design replicating the SparkFun AD8232 ECG module

    36 parts1MIT
  • 2 layers70 × 57 mmTest PCB, the printed circuit board in 3D

    Test PCB

    abbyfinka/FYP-Knitted-EMG

    This repository contains the software and hardware design files developed for my Final Year Project at Imperial College London

    56 parts
  • 2 layers64.8 × 25.5 mmPORTABLE ECG MACHINE, the printed circuit board in 3D

    PORTABLE ECG MACHINE

    jeis-aj/PORTABLE-ECG

    A Handheld ECG Machine with Mobile phone and Laptop interface. Cardiac condition prediction using ML

    92 partsMIT

Questions

How big is the Ecg PCB?

It measures 25 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ecg use?

45 parts, built around the ESP32-S3-WROOM-1-N8, AD8232ACPZ-R7 and MP2667GG-0000-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ecg KiCad files?

From the anemoijereja-eden/ecg repository on GitHub, at the commit this page was made from: the board is pcb/ecg.kicad_pcb and its schematic pcb/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ecg design in my own project?

Its repository states no licence, so its author keeps all rights: ask anemoijereja-eden before reusing the design.