

DB15 Switch
EMPass Automatic control RF Switch device
- Size
- 31.5 × 43.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 62
- Pads
- 171
- Tracks, vias
- 323, 46
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 May 2022
- Updated
- 9 Nov 2023
Overview
DB15 Switch is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/RF_Switch repository on GitHub. It is a 2-layer board of 31.5 × 43.7 mm with 34 parts on 62 nets, routed with 323 tracks and 46 vias.
It is built around the ATMEGA328P-AU, CH340C and STI3508, with the HDSP-A151 among its other parts. Its parts include 12 capacitors, 9 resistors, 4 ICs, 3 diodes and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSTI3508
SOT-23-6-40℃~+125℃@(TJ) 1 100uA 1MHz 2.5V~7V 3A Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSTMIDC-DC ConvertersHDSP-A151
DIP-100.3 1 12.7mmx7.62mmx6.09mm 7 Segment 96mW Common Anode Red DIP-10 LED Segment Displays ROHSBroadcom LimitedLED Segment Displays
README
README.mdRF_Switch
EMPass Automatic control RF Switch device
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C9, C10 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C4, C5, C6, C7 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R8, R9 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U4 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DB15_Male_HighDensity_MountingHoles | 1_resouce:CONN-TH_DS1038-15MBNSIA74-0CC | J1 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D3 |
| 1 | Fuse | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | HDSP-A151 | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U2 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12 | USB1 |
| 1 | INDUCTOR | 1_resouce:IND-SMD_L4.5-W4.2 | L1 |
| 1 | R_Pack08_Split | Resistor_SMD:R_Array_Convex_8x0602 | RN1 |
| 1 | STI3508 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
More from Andy-Cheng1017/RF_Switch
1- 2 layers95.1 × 87.4 mm

Similar boards
- 2 layers86.4 × 63.5 mm

- 2 layers100 × 100 mm

Final Project KiCAD designs
SkyePooley/PONG-for-Microcontrollers
Pong game for arduino LED Matrix
32 parts - 4 layers25.9 × 35.6 mm

- 4 layers144.8 × 184.1 mm

- 2 layers100.5 × 50 mm

- 2 layers169.9 × 190.9 mm

- 2 layers75 × 66 mm

- 2 layers150 × 150 mm

BoardGame
jkordek1/Man-Don-t-Get-Angry-Board-game
"Man don't get mad" - electronic board game
218 parts5
Questions
How big is the DB15 Switch PCB?
It measures 31.5 × 43.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DB15 Switch use?
34 parts, built around the ATMEGA328P-AU, CH340C, STI3508 and HDSP-A151. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DB15 Switch KiCad files?
From the Andy-Cheng1017/RF_Switch repository on GitHub, at the commit this page was made from: the board is V2/DB15_Switch/DB15_Switch/DB15_Switch.kicad_pcb and its schematic V3/DB15_Switch/DB15_Switch/DB15_Switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DB15 Switch design in my own project?
Its repository states no licence, so its author keeps all rights: ask Andy-Cheng1017 before reusing the design.