2 layers90 × 100 mm
2 layers90 × 25 mm
NTUT IXD Graduate Exhibition
- Size
- 90 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 37
- Pads
- 209
- Tracks, vias
- 171, 66
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Sep 2022
- Updated
- 15 Jun 2023
Overview
Power2 is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/LEDCeliling repository on GitHub. It is a 2-layer board of 90 × 25 mm with 63 parts on 37 nets, routed with 171 tracks and 66 vias.
It is built around the FP6188XR-G1, FP6296XR-G1 and CN3765, with the AOD417, KH-DC-044D-2.0STM and HSU60P02 among its other parts. Its parts include 23 capacitors, 16 resistors, 6 diodes, 4 transistors and 4 inductors.
Main components
6
FP6188XR-G1
SOP-8-EP-40℃~+85℃ 1 2A 340kHz 4.5V~23V 923mV~16V Adjustable Buck Buck Built-in SOP-8-EP DC-DC Converters ROHSAdvanced Analog TechnologyDC-DC ConvertersFP6296XR-G1
SOP-8-EP-25℃~+85℃ 1 10A 13V 2.7V~12V 400kHz 450uA Adjustable Boost Boost Built-in SOP-8-EP DC-DC Converters ROHSAdvanced Analog TechnologyDC-DC Converters
CN3765
SSOP-10-150mil-40℃~+85℃ 10uA 4A 6.6V~30V Charging IC Lithium Battery、LiFePO4 Battery Not supported Not supported SSOP-10-150mil Battery Management ROHSShangHai Consonance ElecBattery Management
AOD417
TO-252-55℃~+150℃ 1 P-Channel 1.286nF 15A 2.5V 2.5W 30V 33mΩ@10V、52mΩ@4.5V 440pF 53nC@15V 640pF P-Channel TO-252 MOSFETs ROHSJSMSEMIMOSFETs
KH-DC-044D-2.0STM
SMD-30℃~+70℃ 2mm 30V 500mA 6mm DC Power Jack Surface Mount, Right Angle SMD DC Power Connectors ROHSShenzhen Kinghelm ElecDC Power Connectors
HSU60P02
TO-252-55℃~+150℃ 1 P-Channel 20V 4.6nF 431pF 44nC@4.5V 509pF 60A 650mV 70W 8.5mΩ@4.5V P-Channel TO-252 MOSFETs ROHSHUASHUOMOSFETs
README
README.mdLEDCeliling
NTUT IXD Graduate Exhibition
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 22u | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13, C14, C15, C16, C21, C22, C23 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C6, C9 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R7, R9 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C7, C10 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R11, R12 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C17, C20 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D5 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric | C18, C19 |
| 2 | 15u | 1component:IND-SMD_L7.5-W6.6 | L1, L2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R10 |
| 2 | AOD417 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q3 |
| 2 | D_Schottky | Diode_SMD:D_SMA | D3, D4 |
| 2 | KH-DC-044D-2.0STM | 1component:DC-IN-TH_KH-DC-044D-2.0STM | DC1, DC2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1u | Inductor_SMD:L_1008_2520Metric | L4 |
| 1 | 2.2u | 1component:IND-SMD_L7.5-W6.6 | L3 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 46.5K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 50K | 1component:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | Battery | 1component:Battery | BT1 |
| 1 | CN3765 | 1component:SOIC-10_L4.9-W3.9-P1.00-LS6.0-BL | U1 |
| 1 | Conn_01x01 | 1component:GndConnect | J1 |
| 1 | Conn_01x04 | 1component:VH3.96 4P SMT | J2 |
| 1 | D_Schottky | Diode_SMD:D_SMB | D6 |
| 1 | FP6188XR-G1 | 1component:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U2 |
| 1 | FP6296XR-G1 | 1component:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U3 |
| 1 | HSU60P02 | Package_TO_SOT_SMD:TO-252-2 | Q4 |
| 1 | R_Shunt | 1component:R_2512_6332Metric | R4 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
Questions
How big is the Power2 PCB?
It measures 90 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power2 use?
63 parts, built around the FP6188XR-G1, FP6296XR-G1, CN3765 and AOD417. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power2 KiCad files?
From the Andy-Cheng1017/LEDCeliling repository on GitHub, at the commit this page was made from: the board is Power/Power2.kicad_pcb and its schematic BoardCoverter/BoardCoverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Andy-Cheng1017 before reusing the design.
More from Andy-Cheng1017/LEDCeliling
8- 2 layers100 × 100 mm
- 2 layers86 × 78 mm
- 4 layers38.5 × 19.5 mm
- 2 layers82.5 × 81 mm
- 2 layers43 × 39 mm
- 2 layers16.5 × 27 mm
- 2 layers10 × 10 mm
Similar boards
- 4 layers80 × 55 mm
- 2 layers
- 2 layers15.5 × 47 mm
Velopath final
BananaGithubserfer/velopath
Разработка устройств велосипедной навигации velopath
66 partsGPL-3.0 - 2 layers141.6 × 50 mm
- 6 layers200 × 200 mm
- 2 layers68.5 × 61.5 mm
- 2 layers150 × 65 mm
- 2 layers62.2 × 25.4 mm
