Skip to the content
2 layers100.1 × 58.2 mmTower, the printed circuit board in 3D

Senior Design Project using ESP32s to remake Mario Kart with RC Cars

Size
100.1 × 58.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
59
Pads
146
Tracks, vias
180, 29
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
15 Jan 2022
Updated
28 Apr 2022

Overview

Tower is an open-source printed circuit board by AndreHatu, from the AndreHatu/MarioKart repository on GitHub, published under the MIT licence. It is a 2-layer board of 100.1 × 58.2 mm with 31 parts on 59 nets, routed with 180 tracks and 29 vias.

It is built around the ESP32-SOLO-1C, SS8050-G and BAT760-7. Its parts include 8 resistors, 7 capacitors, 5 connectors, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Mario Kart with RC cars and ESP32s

This project aims at developing a real-life Mario Kart with RC cars and ESP32s. The boards used utilize a single-core MCU (ESP-MINI-1 and ESP-SOLO-1). Schematics and wiring will be posted in the near future.

ECE477 Senior Design at Purdue University.

How it works

We control RC cars with electronics replaced by our own ESP32. All communications are made using ESP-NOW, which is a Wi-Fi like wireless communication protocol. It enables low latency and long distance transmission of packets, with the only restriction they must be less than 250 bytes long. Then, we place checkpoint towers and power-up blocks along the desired track and when cars run over them, a NFC tag is read and its information is sent to a central tower, which either updates records of checkpoints or determines what modifier to give the cars. Modifiers are randomly chosen using ESP's esp_random() function. Checkpoints are stored in two-dimensional arrays initialized upon race creation.

Cloning

When cloning this repo, make sure to use git clone --recursive git@github.com:AndreHatu/MarioKart.git or run git submodule update --init --recursive after doing a standard clone. This ensures all dependencies are downloaded.

Config, Build and Flash

To build, you will need to have installed Espressif's idf from their website. Then run the following commands from a terminal.

text
idf.py set-target esp32
idf.py menuconfig

Inside the menuconfig, you might need to set the Components->freeRTOS->Run only on first core option in case your ESP32 only has one core (like the ones we are using for the project) Then you can build and flash with

text
idf.py build
idf.py -p (PORT) flash

Parts

31
QtyValueFootprintReferences
610kResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R8
4100nFCapacitor_SMD:C_0805_2012MetricC3, C5, C6, C7
20Resistor_SMD:R_0805_2012MetricR6, R7
20.1uFCapacitor_SMD:C_0805_2012MetricC1, C2
2SS8050-GMouser:SOT95P240X115-3NQ1, Q2
2SW_PushButton_Switch_SMD:SW_SPST_CK_KXT3SW1, SW2
122uFCapacitor_SMD:C_0805_2012MetricC4
1BAT760-7Mouser:SOD2513X120ND1
1Conn_01x05Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ3
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1Conn_02x10_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_VerticalJ5
1ESP32-SOLO-1RF_Module:ESP32-WROOM-32IC1
1LEDMouser:APHCM2012QBCDF01D2
1SD_CardConnector_Card:SD_Kyocera_145638109211859+J4
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J1

The 27 most common of 31 parts.

More from AndreHatu/MarioKart

3
  • 2 layers70.8 × 60.7 mmCar, the printed circuit board in 3D

    Car

    AndreHatu/MarioKart

    Senior Design Project using ESP32s to remake Mario Kart with RC Cars

    44 partsMIT
  • 2 layers99.3 × 47.2 mmController, the printed circuit board in 3D

    Controller

    AndreHatu/MarioKart

    Senior Design Project using ESP32s to remake Mario Kart with RC Cars

    37 partsMIT
  • 2 layers79.7 × 66.9 mmCar (1), the printed circuit board in 3D

    Car (1)

    AndreHatu/MarioKart

    Senior Design Project using ESP32s to remake Mario Kart with RC Cars

    33 partsMIT

Similar boards

  • 2 layers120 × 80 mmAkilli guvenlik kasasi, the printed circuit board in 3D

    Akilli guvenlik kasasi

    eemreinceer/Smart_Safe

    AI-powered IoT security system with ESP32-CAM, custom PCB design (KiCad), 3D enclosure (Fusion 360), Firebase cloud sync, and React dashboard. End-to-end embedded engineering project.

    18 parts2
  • 2 layers100 × 60 mmX8-pcb, the printed circuit board in 3D

    X8-pcb

    mattuna15/x8-pcb

    Commander X8 PCB

    100 parts1
  • 2 layers60 × 47.5 mm86 BOX PANEL, the printed circuit board in 3D

    86 BOX PANEL

    yaozong1/86BOX_PCB

    86_BOX PCB

    48 parts1
  • 2 layers28.5 × 53.6 mmESP32 Boardv2.0, the printed circuit board in 3D

    ESP32 Boardv2.0

    jminjares4/ESP32-Development-Board

    KiCad ESP32 implementation

    37 parts21
  • 4 layers97.5 × 90.6 mmESP S3-CP-24 Platform, the printed circuit board in 3D

    ESP S3-CP-24 Platform

    WhirlingBits/ESP32-S3-Platform

    ESP32-S3 Development Board with SD-Card and versatile power management 5V and up to 12V

    193 parts10MIT
  • 2 layers204.3 × 75.1 mmPanelizedESP32, the printed circuit board in 3D

    PanelizedESP32

    valeriyproklov/ESP32-devboard

    An ESP32 devboard I designed in KiCad.

    491 parts2CERN-OHL-P-2.0
  • 4 layers284.2 × 102.8 mmFred v3, the printed circuit board in 3D

    Fred v3

    AMR-Frederico/Fred_PCB

    PCB para o Fred

    243 parts1MIT
  • 2 layers50.8 × 50.1 mmGlove Footprint Rev2.0, the printed circuit board in 3D

    Glove Footprint Rev2.0

    bhageneder/GesticulatuionMobileManipulator

    Embedded Engineering Project Summer 2024

    43 parts1

Questions

How big is the Tower PCB?

It measures 100.1 × 58.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tower use?

31 parts, built around the ESP32-SOLO-1C, SS8050-G and BAT760-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tower KiCad files?

From the AndreHatu/MarioKart repository on GitHub, at the commit this page was made from: the board is schematics/tower.kicad_pcb and its schematic car/car (1).kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tower design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).