
Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

a not-so-small keyboard with a fishy layout
Small fry pcb is an open-source printed circuit board by anchovie-codes, from the anchovie-codes/small-fry repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 365 × 103 mm with 142 parts on 112 nets, routed with 397 tracks and 0 vias.
Its parts include 69 diodes and 1 IC. It belongs with the RP2040 boards of this library.
rev. 1 prototype
some .DXF files are included for a rudimentary sandwich case. additional hardware needed:
required thickness of each plate:
stacking order of plates is, from top to bottom:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 69 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +53 |
| 53 | MX-NoLED | MX_Alps_Hybrid:MX-1U-NoLED | MX10, MX11, MX12, MX13, MX14, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25, MX26, MX27, MX28 +37 |
| 14 | MX-NoLED | MX_Alps_Hybrid:MX-1.75U-NoLED | MX1, MX2, MX15, MX16, MX17, MX30, MX31, MX32, MX44, MX45, MX46, MX57, MX58, MX59 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | MX-NoLED | MX_Alps_Hybrid:MX-2.75U-ReversedStabilizers-NoLED | MX63 |
| 1 | MX-NoLED | MX_Alps_Hybrid:MX-2.25U-ReversedStabilizers-NoLED | MX62 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |

jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

sekigon-gonnoc/torabo-tsuki-lp
torabo-tsuki lp is low profile split keyboard with trackball(s)

PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer

danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts




It measures 365 × 103 mm and has 2 copper layers, 1.6 mm thick.
142 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anchovie-codes/small-fry repository on GitHub, at the commit this page was made from: the board is small-fry-pcb.kicad_pcb and its schematic small-fry-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).