Skip to the content
2 layers365 × 103 mmSmall fry pcb, the printed circuit board in 3D

a not-so-small keyboard with a fishy layout

Size
365 × 103 mm
Copper layers
2
Thickness
1.6 mm
Parts
142
Nets
112
Pads
719
Tracks, vias
397, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Aug 2024
Updated
20 Nov 2024

Overview

Small fry pcb is an open-source printed circuit board by anchovie-codes, from the anchovie-codes/small-fry repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 365 × 103 mm with 142 parts on 112 nets, routed with 397 tracks and 0 vias.

Its parts include 69 diodes and 1 IC. It belongs with the RP2040 boards of this library.

README

README.md

small-fry

silkscreen-noborder rev. 1 prototype

parts needed

  • 1x Raspberry Pi Pico (make sure you get an authentic one with the castellated pins)
  • 69x SOD123 diodes (e.g. 1N4148W)
  • 69 MX or Alps switches (i strongly recommend MX unless you are confident in fabricating your own keycaps)
  • 2x 2U stabilizers
  • 53x 1U keycaps
  • 14x 1.75U keycaps
  • 1x 2.25U keycap
  • 1x 2.75U keycap

tools needed

  • a heat gun + solder paste are highly recommended for soldering the diodes, however they can be hand-soldered if you are patient and skilled.
  • soldering iron + solder wire for soldering the switches and MCU.

assembly notes

  • diode direction is COL to ROW! this means the lines should face down (if you're using the diodes linked above).
  • this PCB does not have holes for tray-mounting; it must be plate-mounted to a case.
  • switchplate .DXF file is included; it should be ~1.5mm thick. recommended material is either metal or FR4. acrylic is technically viable but will add flex.

sandwich case notes

some .DXF files are included for a rudimentary sandwich case. additional hardware needed:

  • 10x M3x8mm male-to-female standoffs (M3x10 will also work, just makes the height taller)
  • 10x M3x4mm screws
  • 10x M3x6x5mm heat-threaded inserts

required thickness of each plate:

  • top plate: 1.5-3mm
  • mid plate: 3mm
  • buffer plate: 3mm
  • bottom plate: 1.5-3mm

stacking order of plates is, from top to bottom:

  • top plate
  • mid plate
  • buffer plate
  • switch plate
  • bottom plate

Parts

142
QtyValueFootprintReferences
69D_SmallDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +53
53MX-NoLEDMX_Alps_Hybrid:MX-1U-NoLEDMX10, MX11, MX12, MX13, MX14, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25, MX26, MX27, MX28 +37
14MX-NoLEDMX_Alps_Hybrid:MX-1.75U-NoLEDMX1, MX2, MX15, MX16, MX17, MX30, MX31, MX32, MX44, MX45, MX46, MX57, MX58, MX59
3LOGOLOGOG***, G***, G***
1MX-NoLEDMX_Alps_Hybrid:MX-2.75U-ReversedStabilizers-NoLEDMX63
1MX-NoLEDMX_Alps_Hybrid:MX-2.25U-ReversedStabilizers-NoLEDMX62
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU1

Similar boards

  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 2 layers156 × 185.9 mmTorabo tsuki lp M, the printed circuit board in 3D

    Torabo tsuki lp M

    sekigon-gonnoc/torabo-tsuki-lp

    torabo-tsuki lp is low profile split keyboard with trackball(s)

    142 parts110
  • 2 layers167.6 × 97.5 mmAS3397 proto DIP, the printed circuit board in 3D

    AS3397 proto DIP

    PhysicsDptAngers/polyUAnalog

    Open source, analog and polyphonic synthesizer

    142 parts88MIT
  • 2 layers357.8 × 124.5 mmVic2020mainboard, the printed circuit board in 3D

    Vic2020mainboard

    danwerner21/vic2020

    A Vic-20 clone created with [almost] all readily available parts

    142 parts78
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    142 parts57CC-BY-4.0
  • 2 layers242.2 × 72.1 mmAtom47, the printed circuit board in 3D

    Atom47

    evyd13/atom47

    Replacement PCB for the Vortex Core

    142 parts30Apache-2.0
  • 2 layers285 × 94.6 mmNice60, the printed circuit board in 3D

    Nice60

    Nicell/nice60

    Pro Micro Powered, Hotswap 60% Keyboard

    142 parts29MIT
  • 2 layers304.8 × 95.3 mmKeybird, the printed circuit board in 3D

    Keybird

    fanf2/kbd

    my homemade keyboard projects

    142 parts22

Questions

How big is the Small fry pcb PCB?

It measures 365 × 103 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Small fry pcb use?

142 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Small fry pcb KiCad files?

From the anchovie-codes/small-fry repository on GitHub, at the commit this page was made from: the board is small-fry-pcb.kicad_pcb and its schematic small-fry-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Small fry pcb design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).