

Big bye
A project that encompasses (almost) all the knowledge and skills I acquired throughout my undergraduate degree, serving as a farewell gift!
- Size
- 49.8 × 71.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 37
- Pads
- 141
- Tracks, vias
- 101, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 May 2023
- Updated
- 3 Aug 2023
Overview
Big bye is an open-source printed circuit board by AnantaSrikar, from the AnantaSrikar/big-bye repository on GitHub. It is a 2-layer board of 49.8 × 71.9 mm with 19 parts on 37 nets, routed with 101 tracks and 1 via.
It is built around the ESP32-WROOM-32 and AMS1117-3.3. Its parts include 7 capacitors, 4 connectors, 4 switches, 2 resistors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
2ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
pcb/README.mdParts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C6 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C5, C7 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT_SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | BTN_DOWN | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW4 |
| 1 | BTN_LEFT | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | BTN_RIGHT | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW2 |
| 1 | BTN_UP | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | USB_C_Plug | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | locked | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3 |
Similar boards
- 2 layers90 × 76.5 mm

- 2 layers85 × 56 mm

- 2 layers62.2 × 30.5 mm

WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44 - 2 layers150 × 50 mm

- 2 layers40 × 68 mm

MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 2 layers259.5 × 60.7 mm

1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0 - 2 layers64.6 × 87.1 mm

- 2 layers139.7 × 88.9 mm

Questions
How big is the Big bye PCB?
It measures 49.8 × 71.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Big bye use?
19 parts, built around the ESP32-WROOM-32 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Big bye KiCad files?
From the AnantaSrikar/big-bye repository on GitHub, at the commit this page was made from: the board is pcb/big_bye.kicad_pcb and its schematic pcb/big_bye.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Big bye design in my own project?
Its repository states no licence, so its author keeps all rights: ask AnantaSrikar before reusing the design.

