2 layers80 × 130 mm
KuluckaMakinesi
emrah1982/KuluckaMakinesi
ESP32 tabanlı, 11 hayvan profili destekleyen çok evreli kuluçka kontrol sistemi. 3.2" TFT dokunmatik ekran, web arayüzü ve OTA güncelleme içerir.
61 parts
2 layers96.5 × 105.4 mm
Mini Record Player Clock
anadskman/Mini-Record-Player-Clock1A compact desktop Bluetooth speaker and clock inspired by a vintage record player. The aim of this project is to combine a functional Bluetooth speaker and Wi-Fi clock into a clean, fully 3D printed desktop display.
- Size
- 96.5 × 105.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 54
- Pads
- 144
- Tracks, vias
- 165, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Jul 2026
- Updated
- 15 Aug 2026
Overview
Mini Record Player Clock is an open-source printed circuit board by anadskman, from the anadskman/Mini-Record-Player-Clock repository on GitHub. It is a 2-layer board of 96.5 × 105.4 mm with 38 parts on 54 nets, routed with 165 tracks and 15 vias.
It is built around the PAM8403, IRLZ44N and SS14. Its parts include 13 capacitors, 10 connectors, 4 resistors, 4 diodes and 2 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
3
PAM8403
SOP-16-40℃~+85℃ 2-Channel 2.2V~5.5V 3Wx2@4Ω 6.3mA 90% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D SOP-16 Audio Amplifiers ROHSSlkorAudio Amplifiers
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdMini Record Player Clock
A compact desktop Bluetooth speaker and clock inspired by a vintage record player. The aim of this project is to combine a functional Bluetooth speaker and Wi-Fi clock into a clean, fully 3D printed desktop display. Rather than using lots of jumper wires and modules glued together, everything is connected through a custom PCB designed specifically for this project.
The record spins while music is playing, the tonearm moves using a servo, and the front display shows the current time synced over Wi-Fi. All electronics are housed inside a custom enclosure designed in Fusion 360.
Features
- Bluetooth music playback
- Wi-Fi synced digital clock
- 2.4" ILI9341 colour TFT display
- Spinning 3D printed record
- Servo driven moving tonearm
- Physical playback buttons
- Custom PCB
- Fully 3D printed enclosure
- Powered by a 5V wall adapter
Hardware
Electronics
- ESP32 Dev Board
- 2.4" ILI9341 TFT Display
- PAM8403 Audio Amplifier
- 4Ω 3W Speaker
- 5V DC Motor
- SG90 Servo
- IRLZ44N MOSFET
- 1N5819 Diodes
- Push Buttons
- LEDs
- Capacitors and Resistors
- Custom PCB
Mechanical
- Fully 3D printed enclosure
- 3D printed record
- 3D printed tonearm
- Motor mount
- Hinged lid
- PCB mounting system
- M2 hardware
Software
The ESP32 is responsible for controlling the entire project. It handles Bluetooth audio, synchronises the clock over Wi-Fi, updates the display, controls the spinning record and tonearm, and reads the playback buttons.
The firmware is written using the Arduino framework and is designed so each part of the project works independently while sharing the same controller.
PCB
A custom two-layer PCB was designed in KiCad to act as the hub of the project. All components connect directly to the PCB which keeps the wiring simple and makes assembly much cleaner.
Some design considerations included:
- Ground planes on both PCB layers
- Wider traces for power distribution
- Decoupling capacitors placed beside each module
- Reverse polarity protection
- Clearly labelled connectors
- Connectors for external buttons, speaker and servo
- Mounting holes for the enclosure
CAD
The enclosure was designed in Fusion 360 around the PCB to ensure everything fits correctly.
The design includes:
- Front display opening
- Side mounted playback buttons
- Speaker openings
- Hinged top lid
- Motor mount
- Servo mount
- PCB mounting points
- Rear barrel jack opening
BOM
| Component | Cost | Status |
|---|---|---|
| TFT Display 2.4" ILI9341 | $6.42 | Buy |
| 4Ω 3W Speaker | $2.19 | Buy |
| Screw Terminal (7x) | Owned | Owned |
| DC Barrel Jack | Owned | Owned |
| LEDs (2x) | Owned | Owned |
| MOSFET | Owned | Owned |
| Header Pins | Owned | Owned |
| PAM8403 Amplifier Module | $4.02 | Buy |
| DC Motor | Owned | Owned |
| SG90 Servo Motor | Owned | Owned |
| 100µF Capacitors | Owned | Owned |
| 100nF Ceramic Capacitors | Owned | Owned |
| Capacitors | $8.34 | Buy |
| 10µF Capacitors | $2.34 | Buy |
| Resistors | Owned | Owned |
| 1N5819 Diodes | $2.02 | Buy |
| Push Buttons | Owned | Owned |
| ESP32 Dev Board | $4.54 | Buy |
| PCB | $27.77 | Buy |
| Pin Headers (ESP32) | $6.31 | Buy |
| Shipping | $5.39 | |
| Duties | $32.71 | |
| Total | $95.01 |
Images
| Schematic | PCB | CAD |
|---|---|---|
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C5, C7, C9, C11, C13 |
| 4 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C4, C6, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C8, C10 |
| 2 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | DEVKIT_V1_ESP32-WROOM-32 | DEVKIT_V1_ESP32-WROOM-32:MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
| 1 | Gate 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Gate PD 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | ILI9341 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J7 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | MOTOR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
| 1 | Next | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | POWER_LED | LED_THT:LED_D5.0mm | D3 |
| 1 | Play | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J5 |
| 1 | Prev | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3 |
| 1 | SERVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | SPK L | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | SPK R | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J10 |
| 1 | SS14 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | STATUS_LED | LED_THT:LED_D5.0mm | D4 |
| 1 | pam8403 | pam8403:pam8403 | U2 |
Questions
How big is the Mini Record Player Clock PCB?
It measures 96.5 × 105.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mini Record Player Clock use?
38 parts, built around the PAM8403, IRLZ44N and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini Record Player Clock KiCad files?
From the anadskman/Mini-Record-Player-Clock repository on GitHub, at the commit this page was made from: the board is PCB/Mini Record Player Clock.kicad_pcb and its schematic PCB/Mini Record Player Clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini Record Player Clock design in my own project?
Its repository states no licence, so its author keeps all rights: ask anadskman before reusing the design.
Similar boards
- 4 layers
Mosfets
abd-alaj/BLDC-motor-custom-inverter
Matlab, Simulink, Hardware and C-code for a custom inverter project.
139 parts1 - 2 layers204.5 × 113 mm
- 2 layers118 × 84.5 mm
HoloCade Driver Shield
scifiuiguy/HoloCade_Unreal
HoloCade SDK for Unreal Engine - designed to streamline deployment of professional-grade multiplayer VR/AR/AI/Robotic LBE in venues using immersive theater actors, standardized large hydraulics for motion and haptics…
78 parts1MIT - 2 layers115.8 × 98.6 mm
- 2 layers57 × 97 mm
MainCollar
plyalex/OpenFence
OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.
78 parts28GPL-3.0 - 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers95.5 × 104.6 mm
FmRadio
TeknoTrek/Arduino-Nano-FM-Radio-Si4703
Part of the Teknotrek YouTube channel, this repository includes KiCad files for an FM Radio project using Arduino Nano, Si4703, and other components.
16 parts7