

FPCB Biosensor MetaSense
Hardware for MetaSense's KiCad design
- Size
- 55.5 × 27 mm
- Copper layers
- 4
- Thickness
- 0.86 mm
- Parts
- 64
- Nets
- 92
- Pads
- 259
- Tracks, vias
- 645, 180
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 May 2026
- Updated
- 7 May 2026
Overview
FPCB Biosensor MetaSense is an open-source printed circuit board by amnzer, from the amnzer/MetaHardware repository on GitHub. It is a 4-layer board of 55.5 × 27 mm with 64 parts on 92 nets, routed with 645 tracks and 180 vias.
It is built around the AD5941BCPZ-RL7, ADP162AUJZ-3.3-R7 and DG468DV-T1-E3, with the JS102011SCQN, BD125-10-A-0305-0580-L-B and DFE201610E-2R2M=P2 among its other parts. Its parts include 24 capacitors, 20 resistors, 4 ICs, 4 connectors and 1 transistor.
Main components
6AD5941BCPZ-RL7
LFCSP-48-40℃~+85℃ 1 1.82V 16 16MHz、32MHz 2.8V~3.6V 400kHz 400kHz 6.5uA 80dB Programmable gain、Multiplexers、Input buffering、Internal reference source、Power-on reset SPI LFCSP-48 Analog Front End (AFE) ROHSAnalog DevicesAnalog Front End (AFE)ADP162AUJZ-3.3-R7
TSOT-5-40℃~+125℃ 1 105uVrms 150mA 195mV@(150mA) 3.3V 42uA 5.5V 72dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDG468DV-T1-E3
TSOP-6-1.5mm-20V~-4.5V、4.5V~20V、7V~36V -40℃~+85℃ 1 100ns 1:1 50ns 76pF 7Ω Glitch-free switching TSOP-6-1.5mm Analog Switches, Multiplexers ROHSVishay IntertechnologyAnalog Switches, MultiplexersJS102011SCQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 5.5mm 6V 8.5mm Copper Alloy Rectangular Columnar SMD(SMT) Tab SPDT Silver Surface Mount,Vertical White SMD Slide Switches ROHSC&KSlide SwitchesBD125-10-A-0305-0580-L-B
SMD,P=1.27mm-40℃~+105℃ 1.27mm 1.27mm 10P 1A 2 2x5P 5 5.08mm 5.7mm 6.35mm Black LCP Surface Mount,Vertical UL94V-0 SMD,P=1.27mm Wire To Board Connector ROHSGlobal Connector Technology (GCT)Wire To Board ConnectorDFE201610E-2R2M=P2
08061.7A 140mΩ 2.2uH 2.4A ±20% 0806 Inductors (SMD) ROHSMurataInductors (SMD)
README
README.mdMetaHardware
Hardware for MetaSense's KiCad design.
hardware_v1 is the PCB version used for the prototype mentioned in the final report.
hardware_v2 aims to fix a few of the major problems that hardware_v1 has in terms of reliability and simplicity, although we have not yet tested hardware_v2. hardware_v2 is the more natural starting point for the next team to pick up the MetaSense project
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP3, TP4, TP5, TP7, TP8, TP9, TP10 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6, C17, C18, C21, C22, C23, C24 |
| 4 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C8, C13, C15, C16 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C12, C20 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R6, R9, R10, R11 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C40, C41 |
| 3 | 300k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18, R28 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R19 |
| 2 | 0 R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 2.2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C11, C14 |
| 2 | BD125-10-A-0305-0580-L-B | metasenseflib:CONN_BD125-10-x-0305-0580-L-x_GCT | J3, J4 |
| 1 | 0 | metasenseflib:RES_ERJ1G_PAN | R4 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1.5M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 169k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 522711079 | metasensealt:CON_522711079_MOL | J2 |
| 1 | AD5941BCPZ-RL7 | metasensealt:QFN50P700X700X80-49N | IC1 |
| 1 | ADP162AUJZ-3.3-R7 | metasensealt:ADP162AUJZ-3.3-R7 | U4 |
| 1 | BCV62C,215 | metasenseflib:BCV62C215 | Q2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | DFE201610E-2R2M=P2 | metasensealt:DFE201610E-2R2M=P2 | L2 |
| 1 | DG468DV-T1-E3 | metasenselib:TSOP6_DG_VIS | IC3 |
| 1 | GRM188R60J106ME47D | metasensealt:GRM188R60J106ME47D | C37 |
| 1 | JS102011SCQN | metasenseflib:SWITCH_1SCQN | U1 |
| 1 | TPS61096ADSST | metasenselib:DSS0012A | PS2 |
| 1 | ~ | metasenseflib:BGM220SC22WGA2R | BGM220SC22WGA2R1 |
More from amnzer/MetaHardware
1- 4 layers64.2 × 35.5 mm

Similar boards
- 6 layers100 × 100 mm

Ai vision
embeddedci-com/pcb-trace-length-analyzer
Two of them, and the difference between them is the point.
370 parts3Apache-2.0 - 4 layers80 × 62 mm

Pami 2026 V2
ARCLille/PAMI_2026
The goal of this project is to create an autonomous robot called PAMI. This directory contains the PCB and the code uploaded to the microcontroller that allows PAMI to operate independently.
28 parts - 2 layers139 × 45 mm

Soil Power Sensor
jlab-sensing/ENTS-node-hardware
Schematics and design for soil MFC voltage and current sensing
72 parts - 2 layers

- 2 layers174 × 97.8 mm

- 2 layers102 × 45 mm

HELPStat V2
stevfu/eis_capstone
Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs
51 parts1MIT - 4 layers65 × 56 mm

PCB impedance
BenoitSchick/Fungi
The goal of this project is to measure the impedance of bags containing mycelium in order to observe how mycelium growth influences impedance.
53 parts - 4 layers140.5 × 58.6 mm

Questions
How big is the FPCB Biosensor MetaSense PCB?
It measures 55.5 × 27 mm and has 4 copper layers, 0.86 mm thick.
What parts does the FPCB Biosensor MetaSense use?
64 parts, built around the AD5941BCPZ-RL7, ADP162AUJZ-3.3-R7, DG468DV-T1-E3 and JS102011SCQN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FPCB Biosensor MetaSense KiCad files?
From the amnzer/MetaHardware repository on GitHub, at the commit this page was made from: the board is hardware_v2/fPCB Biosensor MetaSense.kicad_pcb and its schematic hardware_v1/bluetooth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FPCB Biosensor MetaSense design in my own project?
Its repository states no licence, so its author keeps all rights: ask amnzer before reusing the design.