2 layers100 × 100 mm
Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT
2 layers75.7 × 47.4 mm
PIC Microcontroller Development Board
aminesrif04/PIC_Microcontroller_Development_BoardPIC Microcontroller Development Board is a custom development board designed for learning and prototyping with PIC microcontrollers. The project includes the complete KiCad schematic and PCB design, with a focus on a practical, modular, and easy-to-use hardware platform for embedded systems development.
- Size
- 75.7 × 47.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 29
- Pads
- 100
- Tracks, vias
- 200, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Sep 2026
- Updated
- 20 Sep 2026
Overview
PIC Microcontroller Development Board is an open-source printed circuit board by aminesrif04, from the aminesrif04/PIC_Microcontroller_Development_Board repository on GitHub. It is a 2-layer board of 75.7 × 47.4 mm with 24 parts on 29 nets, routed with 200 tracks and 29 vias.
It is built around the AMS1117-5.0. Its parts include 8 connectors, 6 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the microcontroller boards boards and the PIC boards of this library.
Main components
1Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C2, C3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | 22pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C6 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | GND Hook | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ICSP PORT | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J7 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | OSC Port | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | PIC18F2550-ISP | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | PORTA | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | PORTB | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | PORTC | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Power Port | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J2 |
| 1 | Reset_Btn | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1 |
Questions
How big is the PIC Microcontroller Development Board PCB?
It measures 75.7 × 47.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIC Microcontroller Development Board use?
24 parts, built around the AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC Microcontroller Development Board KiCad files?
From the aminesrif04/PIC_Microcontroller_Development_Board repository on GitHub, at the commit this page was made from: the board is PIC_Microcontroller_Development_Board.kicad_pcb and its schematic PIC_Microcontroller_Development_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC Microcontroller Development Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask aminesrif04 before reusing the design.
Similar boards
- 2 layers20.3 × 110 mm
4HPico
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
73 parts84 - 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 2 layers73 × 113 mm
- 2 layers30 × 110.5 mm
Kicad main
johannesstrueber/dots
DOTS eurorack module pcb schematics and code ATMega328 based
72 parts28 - 2 layers139.7 × 88.9 mm
- 2 layers135 × 100 mm
- 2 layers160 × 138 mm
