Skip to the content
2 layers100 × 140 mmPrototype-1, the printed circuit board in 3D

The PC-09 will be a 6309 based microcomputer.

Size
100 × 140 mm
Copper layers
2
Thickness
1.63 mm
Parts
35
Nets
78
Pads
244
Tracks, vias
560, 135
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Apr 2020
Updated
7 Oct 2025

Overview

Prototype-1 is an open-source printed circuit board by amberisvibin, from the amberisvibin/chibi-pc09 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 140 mm with 35 parts on 78 nets, routed with 560 tracks and 135 vias.

It is built around the 74HCT04D, 74HCT30D and 74HCT32D, with the B3F-1000 among its other parts. Its parts include 15 capacitors, 8 resistors, 7 ICs, 2 connectors and 2 crystals.

Main components

4

README

README.md

chibi pc-09

Archived!

This repo has been archived, and the different parts have been migrated to other repos.

The PCB for prototype 1 has been moved to https://gitea.ambersplace.net/chibi/pc09-prototype-1

The firmware has been moved to https://gitea.ambersplace.net/chibi/chibi-firmware

Gitea last commit GitHub last commit

Description

The PC-09 will be a 6309 based microcomputer with an MMU using 74HC670 register files and dual 16550 UARTs. The plan is to eventually add uPD7220 graphics and PS/2 mouse and keyboard.

The two 74HC670s will take the top 4 bits of the address bus and expand them to 8 bits, turning the 16 bit cpu address space into a 20 bit address space capable of addressing 1MB of memory. Memory pages are 4KB. Being a register file, any page can be mapped to any slot, allowing complex memory management schemes.

The 16550 UART is capable of interrupt driven operation with FIFOs, allowing for characters to be processed in batches rather than individually, minimizing task switch delays. They also support hardware flow control, and some versions can automatically assert RTS when the FIFO is nearing full.

The uPD7220 graphics are very powerful, allowing 16 colors at 640x480, but it is a complex chip to get working. It will be left for a later date.

The solution for PS/2 keyboard and mouse have not yet been decided.

Progress

I had started wiring together a board for prototyping, but it was destroyed in hurricane Helene. I am now recreating it in schematic form in order to order a PCB.

Prototype 1 is currently in progress. It will be a much simpler system. It will have no MMU, just the CPU, some RAM, some ROM, and the UART.

The PCB and parts for Prototype #1 have been ordered, and assembly will begin soon. Initial test code is now available in the code/ directory.

Assembly is in progress.

License

This project is licensed under the MIT license. This applies to both the hardware (schematics, bill of materials, pcb layouts) and documentation. This does not apply to the datasheets/ directory or code/assist09/. Those files belong to their respective copyright holders.

Parts

35
QtyValueFootprintReferences
90.1uFCustom:CAP_C320C_MR_X7R_KEMC1, C2, C3, C4, C5, C6, C7, C14, C16
6100KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR4, R5, R6, R7, R8, R9
224pFCustom:CAP_C317_KEMC8, C9
10.01uFCustom:CAP_C315C_MR_X7R_KEMC15
11.5kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR2
11.8432 MHzCrystal:Crystal_HC49-U_VerticalX2
112MHzCrystal:Crystal_HC49-U_VerticalX1
116550Package_DIP:DIP-40_W15.24mm_SocketU4
118pFCustom:CAP_C317_KEMC12
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR3
11uFCustom:CAP_C330C_MR_X7R_KEMC13
139FS010Package_DIP:DIP-32_W15.24mmU3
147pFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC11
162256Package_DIP:DIP-28_W15.24mm_SocketU2
163C09Package_DIP:DIP-40_W15.24mm_SocketU1
174HCT04Package_DIP:DIP-14_W7.62mm_SocketU5
174HCT30Package_DIP:DIP-14_W7.62mm_SocketU7
174HCT32Package_DIP:DIP-14_W7.62mm_SocketU6
1B3F-1000Custom:SW_B3F-1000_OMRSW1
1FTDIConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1PWRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

Similar boards

  • 2 layers368.3 × 215.9 mmTTL 6510 Computer fab, the printed circuit board in 3D

    TTL 6510 Computer fab

    StefansAI/TTL-6510-Computer

    Yet another CPU made from TTL chips

    330 parts1
  • 4 layers280 × 140 mmP8x io card, the printed circuit board in 3D

    P8x io card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    63 parts
  • 2 layers146.3 × 96.5 mmMain board v1, the printed circuit board in 3D

    Main board v1

    nojan1/project-wrass

    The purpose of Project Wrass is to develop the Wrass 1.

    67 parts
  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    merlinkv/Omega_MSX2

    Update of the Omega Home Computer Project

    265 parts40GPL-3.0
  • 4 layers99.8 × 99.8 mmHD6309sbc, the printed circuit board in 3D

    HD6309sbc

    jimbro1000/HD6309sbc

    Single board computer using Hitachi HD6309

    65 parts1
  • 2 layers62.9 × 61.6 mmVIC-20 Internal 8KB RAM, the printed circuit board in 3D

    VIC-20 Internal 8KB RAM

    BrettHallen/Commodore_VIC20

    Hardware & information for the VIC-20

    15 parts4

Questions

How big is the Prototype-1 PCB?

It measures 100 × 140 mm and has 2 copper layers, 1.63 mm thick.

What parts does the Prototype-1 use?

35 parts, built around the 74HCT04D, 74HCT30D, 74HCT32D and B3F-1000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Prototype-1 KiCad files?

From the amberisvibin/chibi-pc09 repository on GitHub, at the commit this page was made from: the board is pcb/prototype-1/v1.1/prototype-1.kicad_pcb and its schematic pcb/prototype-1/v1.0/prototype-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Prototype-1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).