
Nixie control board
alxhoff/Nixie-tube-clock
Firmware for a nixie tube clock based on STM32 hal libraries

Firmware for a nixie tube clock based on STM32 hal libraries
Nixie 2 digit board is an open-source printed circuit board by alxhoff, from the alxhoff/Nixie-tube-clock repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 50 mm with 99 parts on 81 nets, routed with 545 tracks and 36 vias.
It is built around the MPSA42. Its parts include 11 ICs, 7 resistors, 5 connectors, 2 capacitors and 1 transistor. It belongs with the lEDs and displays boards of this library.
Firmware for a nixie tube clock based on STM32 hal libraries
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 15K | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5 |
| 4 | 570Nixie | keyboard:Nixie-570M-573M | U1, U4, U7, U10 |
| 4 | SN74141-BCD-DEC-DECODE | Housings_DIP:DIP-16_W7.62mm_LongPads | U2, U5, U8, U11 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 15K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | P1 |
| 1 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | P3 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
| 1 | Dot Connection | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | GPIO in for dot | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Logo | keyboard:Logo | U6 |
| 1 | MPSA42 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SN43HC595 | keyboard_extended:SOP16L | U9 |
| 1 | SN43HC595 | SMD_Packages:SOP16L | U3 |
The 26 most common of 99 parts.

alxhoff/Nixie-tube-clock
Firmware for a nixie tube clock based on STM32 hal libraries

vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.

BeeHive-org/BeeHive
BeeHive: a flexible open hardware platform for behavioural experiments

mistic100/Nixie-Clock-IN2
Check out my other projects: - Nixie Clock IN14 - Nixie Clock IN12 - IV-27 VFD Clock

profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.


lambdaBoost/MC6205-graphical-display
graphical display on old neon plasma screen

Architeuthis-Flux/IGV1-16_Driver_Backpack
A board that screws onto the back of an IGV1-16 or Burroughs Self-Scan and handles the HV buffering between it and a RPi Pico W

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
99 parts, built around the MPSA42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alxhoff/Nixie-tube-clock repository on GitHub, at the commit this page was made from: the board is hardware/nixie_2_digit_board/nixie_2_digit_board.kicad_pcb and its schematic hardware/nixie_control_board/3v3_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).