
ZSWatch Watch DevKit
ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.

Meme o clock pcb is an open-source printed circuit board by Alwin936, from the Alwin936/.history repository on GitHub. It is a 4-layer board of 88 × 100 mm with 24 parts on 50 nets, routed with 226 tracks and 13 vias.
It is built around the APDS-9306-065. Its parts include 7 resistors, 6 capacitors, 4 connectors, 4 switches and 2 ICs. It belongs with the lEDs and displays boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 634k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | APDS-9306 | OptoDevice:Broadcom_LGA-8_2x2mm_P0.53mm | U2 |
| 1 | Arduino_Nano_ESP32 | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J2 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.

maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board



tmjnijssen/OSCD_demo_PCB
Open Science Community Delft demonstration PCB


HeyPCB/moon-light
Luna, the night-light moon: A sleepy moon that turns on at dusk and tucks itself in after you fall asleep. KiCad 10, heypcb.ai merch.

It measures 88 × 100 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the APDS-9306-065. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Alwin936/.history repository on GitHub, at the commit this page was made from: the board is meme-o-clock-pcb.kicad_pcb and its schematic meme-o-clock-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Alwin936 before reusing the design.