Skip to the content
2 layers71.8 × 32.5 mmMicrodrive pcb, the printed circuit board in 3D

Schematic and PCB of the Sinclair QL Computer

Size
71.8 × 32.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
36
Pads
92
Tracks, vias
416, 28
Pours
7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Dec 2024
Updated
5 Apr 2025

Overview

Microdrive pcb is an open-source printed circuit board by alvaroalea, from the alvaroalea/QL_Schematic repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 71.8 × 32.5 mm with 26 parts on 36 nets, routed with 416 tracks and 28 vias.

Its parts include 8 capacitors, 7 resistors, 2 ICs, 2 diodes and 2 connectors.

README

README.md

Sinclair QL - Schematics & PCB

Schematic, PCB of the Sinclair QL Computer

(C) 2024 Alvaro Alea Fdz.

License under: CERN Open Hardware Licence Version 2 - Strongly Reciprocal

https://ohwr.org/cern_ohl_s_v2.txt

Folder: Issue_6

This folder contain the schematic of the original Issue 6 of sinclair QL, from pictures found on internet.

My image My image

STATUS

  • Schematic - 100% draw, ERC passed
  • PCB - 100% draw, ERC passed
  • NOT TESTED

TODO

  • Check a Read PCB.

Folder: Issue_5

This folder contain the schematic of the Issue 5

My image My image

STATUS

  • Schematic - 99% draw, ERC passed
  • PCB - 99% draw, ERC passed incomplete, component side is 99%, at least 1 track missing, solder side is 100%, but 1 aditional track was need to complete the schematic.
  • NOT TESTED

Folder: Issue_2

Future schematic of the Issue 2

STATUS

  • Schematic - 0% not evaluated.
  • PCB - 5% draw, incomplete, actually based on Issue 6, Got Good Picture of Solder side (90% Cover) and data from componentes (about 25%)
  • INCOMPLETE, NOT TESTED

Folder: Issue_7ALEA

Future schematic & PCB of a improved Sinclair QL with moderm components.

STATUS

  • Schematic - 100% draw, ERC Passed
  • PCB - 100% draw, ERC passed
  • NOT TESTED

DONE

  • Change VCC track to GND to enhaced microdrive operation (mandatory mod. of service manual)
  • Incorporate R107,108 on PCB, not need to solder over ZX8302
  • Incorporate 5 diodes on PCB, not need to solder over ZX8301 to protect it

TODO

  • Other mod of service manual
  • Aereal componentes
  • Other mod by german issues
  • replace mc1488 y mc1489 by max232
  • replace serial conector by DB9
  • replace RAM by 4x (64x8) chips (Spectrum +2A)

GOOD IDEAS

  • replace ROM by ssf39a40 (512Kb)
  • remove Composite out and RGB and replace by VGA (rp2040)
  • split microdrive and power supply circuits
  • remplace 68008 by 68020 at 15Mhz.
  • Add 2x 512Kb sram (16bits access with 68020)
  • Add floppy interface
  • Add RTC
  • Add rp2040 for USB keyboard
  • Add Qimsi mouse (using same rp2040 of keyboard?)

FRIKI

  • Add 2x 1024Kb sram (16bits access with 68020)
  • Add a PSG
  • Add qubide interface
  • Add footprint for Lion's ZX8301 replacement

Parts

26
QtyValueFootprintReferences
21N4148Diode_THT:D_DO-34_SOD68_P10.16mm_HorizontalD12, D14
2220p8bits:C_Disc_D7.5mm_W2.5mm_P12.17mm_WC15, C17
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR34, R36
2330p8bits:C_Disc_D7.5mm_W2.5mm_P12.17mm_WC5, C13
247n8bits:C_Disc_D7.5mm_W2.5mm_P12.17mm_WC49, C51
24K78bits:R_Axial_DIN0207_L6.3mm_D2.5mm_P12.7mm_Horizontal_WR42, R44
24K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR38, R40
2Conn_01x07Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ101, J102
10,22u/35V8bits:CP_Axial_L9.0mm_D3.8mm_P12.95mm_HorizontalC11
10,47u/35V8bits:CP_Axial_L9.0mm_D3.8mm_P12.95mm_HorizontalC9
1100nCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P10.00mmDC28
12G007Package_DIP:DIP-24_W15.24mmIC29
12K28bits:R_Axial_DIN0207_L6.3mm_D2.5mm_P12.7mm_Horizontal_WR100
1L8bits:Magnetic-head-2-coilL2
1L8bits:Magnetic-head-1-coilL6
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalIC31
1Motor_DCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalM2
1SW_SPDTConnector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_VerticalSW1

More from alvaroalea/QL_Schematic

1
  • 2 layers382.9 × 135.9 mmIssue 6, the printed circuit board in 3D

    Issue 6

    alvaroalea/QL_Schematic

    Schematic and PCB of the Sinclair QL Computer

    284 parts11CERN-OHL-S-2.0

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Microdrive pcb PCB?

It measures 71.8 × 32.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Microdrive pcb use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Microdrive pcb KiCad files?

From the alvaroalea/QL_Schematic repository on GitHub, at the commit this page was made from: the board is Issue_6/extras/microdrive_pcb/microdrive_pcb.kicad_pcb and its schematic Issue_2/Issue_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Microdrive pcb design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).