2 layers99.1 × 99.1 mm
Plusd
alvaroalea/plusD-clone
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
69 parts25
2 layers99.1 × 87.6 mm
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
- Size
- 99.1 × 87.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 91
- Pads
- 404
- Tracks, vias
- 1,835, 91
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jun 2018
- Updated
- 26 Apr 2023
Overview
Plusd is an open-source printed circuit board by alvaroalea, from the alvaroalea/plusD-clone repository on GitHub. It is a 2-layer board of 99.1 × 87.6 mm with 52 parts on 91 nets, routed with 1,835 tracks and 91 vias.
It is built around the 74LS126PC, 74LS00SC and 74LS175PC, with the 74LS27P-E, 74LS374PC and L7805 among its other parts. Its parts include 17 capacitors, 11 resistors, 11 ICs, 4 diodes and 4 connectors. It belongs with the retro computing and games and interfaces and adapters boards of this library.
Main components
6
74LS126PC
DIP-140℃~+70℃ 1 130mA 24mA 4 4.75V~5.25V 5.2mA 74LS Output enable、Short-Circuit Protection Tri-State Unidirectional DIP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates
74LS175PC
PDIP-160℃~+70℃ 1 10ns 18mA 25ns@5V,15pF 30MHz 4 4.75V~5.25V 5ns 74LS Series Asynchronous Complementary type D-Type Reset Rising Edge PDIP-16 Flip Flops ROHSTexas InstrumentsFlip Flops74LS27P-E
DIP-14-20℃~+75℃ 15ns@5V,15pF 2.7V 2V 3 3 400mV、500mV 74LS 800mV NOR Gate DIP-14 Logic Gates ROHSRenesas ElectronicsLogic Gates
74LS374PC
PDIP-200ns 0℃~+70℃ 1 20ns 28ns@5V,45pF 35MHz 4.75V~5.25V 45mA 74LS Series 8 D-Type Rising Edge Tri-State PDIP-20 Flip FlopsonsemiFlip Flops
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
Rev_02/README.mdThe +D Interface Disk for ZX Spectrum
the schematic and PCB for this interfaz, make in KICAD also the gerber to order, the PCB is less than 10x10cm so it's very cheap.
dificult to found a WD1772
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 4 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R9 |
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | 100u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1, C6, C7 |
| 3 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D3, D4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
| 1 | 100p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | 10n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 33p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 62256 | Package_DIP:DIP-28_W15.24mm_LongPads | U7 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm_LongPads | U4 |
| 1 | 74LS06 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | 74LS126 | Package_DIP:DIP-14_W7.62mm_LongPads | U5 |
| 1 | 74LS175 | Package_DIP:DIP-16_W7.62mm_LongPads | U6 |
| 1 | 74LS27 | Package_DIP:DIP-14_W7.62mm_LongPads | U10 |
| 1 | 74LS374 | Package_DIP:DIP-20_W7.62mm_LongPads | U9 |
| 1 | 8.000Mhz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | AT28C256 | Package_DIP:DIP-28_W15.24mm_LongPads | U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J3 |
| 1 | Conn_02x17_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | J1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U12 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | Mounting_Hole | MountingHole:MountingHole_3mm | MK1 |
| 1 | Mounting_Hole_PAD | MountingHole:MountingHole_3mm_Pad_Via | MK2 |
| 1 | PAL20L8 | Package_DIP:DIP-24_W7.62mm_LongPads | U8 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW2 |
| 1 | SW_DPST_x2 | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | WD1772 | Package_DIP:DIP-28_W15.24mm_LongPads | U3 |
| 1 | ZX_Spectrum_Connector_GENERIC_SORTED | SINCLAIR:ZX_CONN | J2 |
Questions
How big is the Plusd PCB?
It measures 99.1 × 87.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plusd use?
52 parts, built around the 74LS126PC, 74LS00SC, 74LS175PC and 74LS27P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plusd KiCad files?
From the alvaroalea/plusD-clone repository on GitHub, at the commit this page was made from: the board is Rev_02/plusd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plusd design in my own project?
Its repository states no licence, so its author keeps all rights: ask alvaroalea before reusing the design.
More from alvaroalea/plusD-clone
3- 2 layers99.1 × 87.6 mm
Plusd
alvaroalea/plusD-clone
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
49 parts25 - 2 layers106.7 × 83.8 mm
Plusd no route
alvaroalea/plusD-clone
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
47 parts25
Similar boards
- 2 layers630 × 300 mm
- 2 layers123.2 × 77.5 mm
- 2 layers426 × 307 mm
I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts - 4 layers337.6 × 105.7 mm
ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers478 × 183 mm
- 4 layers218.4 × 114 mm
Video v2.0
ksr/YACC1-D
YACC1 (Yet Another Custom CPU) - definitive tree: hardware, firmware, software, tools and docs for the hand-built TTL computer. Supersedes ksr/YACC1-2020.
121 parts - 2 layers190.5 × 77.5 mm
NinthWave512K
XekriRedmane/ninth_wave_256k
Reverse engineered Ninth Wave memory expansion board for Apple IIe.
69 partsMIT - 2 layers228.1 × 172.7 mm
