alicedimauro/Tilt1Starter is an open-source printed circuit board by alicedimauro, from the alicedimauro/Tilt repository on GitHub. It is a 4-layer board of 179.3 × 72.5 mm with 59 parts on 81 nets, routed with 343 tracks and 70 vias.
It is built around the TSOP31438, ULN2003BD and ICM-42670-P, with the S1A among its other parts. Its parts include 24 resistors, 12 capacitors, 7 diodes, 5 ICs and 4 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8, C13, C17 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15, R23, R25, R26 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20, R21, R22, R24 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R5, R8 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D5, D6 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 2N2222 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | DOWN | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | HiLetGo_ST7735R | ECE319K:hiletgo_st7735r | U4 |
| 1 | ICM-42670-P | ECE319K:XDCR_ICM-42670-P | MT1 |
| 1 | LED | ECE319K:LED_D5.0mm | D4 |
| 1 | LEFT | Button_Switch_SMD:SW_SPST_PTS645 | SW2 |
| 1 | LP-MSPM0G3507 | ECE319K:ti_LP_MSPM0G3507 | U2 |
| 1 | MCP34119D | ECE319K:DIP-8_W7.62mm_LongPads | U3 |
| 1 | PTA2043 | ECE319K:PTA2043pot | RV1 |
| 1 | RIGHT | Button_Switch_SMD:SW_SPST_PTS645 | SW4 |
| 1 | S1A | Diode_SMD:D_SMA | D7 |
| 1 | Speaker | ECE319K:Testpoint_1x02_P2.54mm | J2 |
| 1 | TSOP31438 | ECE319K:TSOP31438 | U6 |
| 1 | ULN2003B | ECE319K:SOIC127P600X175-16N | U5 |
| 1 | UP | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | Vibration Motor | ECE319K:Testpoint_1x02_P2.54mm | M1 |
devanshjoshi08/CrickHit
Real-time cricket batting game on the TI MSPM0G3507 (ARM Cortex-M0+) with triple-ISR architecture, custom KiCad PCB, 5-bit DAC audio, and 3D-printed enclosure. Built for ECE 319H at UT Austin.
se1yu/BlockBlast
Using knowledge from ECE 319H at UT Austin (Intro to Embedded Systems) to build a custom video game console and to program Block Blast from scratch.
SiddharthaG09/319KFinalProject
For our final project, we recreated Space Invaders in C, using a custom-designed PCB and an MSPM0G3507 microcontroller.
SathvikY3533/DuelTanks
Duel Tanks is a real-time two-player artillery game built completely from scratch on the MSPM0G3507 microcontroller.
Fisheiyy/Better-Klipper-Expander
A RP2040 based 3D Printer Port Expander
It measures 179.3 × 72.5 mm and has 4 copper layers, 1.6 mm thick.
59 parts, built around the TSOP31438, ULN2003BD, ICM-42670-P and S1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alicedimauro/Tilt repository on GitHub, at the commit this page was made from: the board is Starter/Starter.kicad_pcb and its schematic Starter/Starter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alicedimauro before reusing the design.