

Si4-hat
- Size
- 31.5 × 47.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 41
- Pads
- 160
- Tracks, vias
- 538, 94
- Pours
- 233
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Apr 2026
- Updated
- 5 Apr 2026
Overview
Si4-hat is an open-source printed circuit board by aliadnani, from the aliadnani/si4 repository on GitHub. It is a 4-layer board of 31.5 × 47.5 mm with 45 parts on 41 nets, routed with 538 tracks and 94 vias.
It is built around the CS42L52-CNZR and TLV73325PDBV. Its parts include 25 capacitors, 12 resistors, 5 connectors and 2 ICs.
Main components
2CS42L52-CNZR
QFN-40-EP(6x6)-40℃~+85℃ 1.65V~2.63V 4kHz~96kHz Encoder/decoder I2C On-chip digital gain、Mute control、Master-slave clock negotiation QFN-40-EP(6x6) Audio Interface ICs ROHSCirrus LogicAudio Interface ICsTLV73325PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 2.5V 270mV@(300mA) 300mA 34uA 5.5V 68dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1 uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C7, C8, C10, C11, C12, C14, C15, C16, C17, C21, C22, C23 |
| 6 | 10 K | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R11, R12 |
| 5 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C6, C13, C19, C24, C25 |
| 2 | 0.022 uF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | 100 K | Resistor_SMD:R_0805_2012Metric | R3, R6 |
| 2 | 150 pF | Capacitor_SMD:C_0805_2012Metric | C18, C20 |
| 2 | 2.2 K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 51.1 R | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | Audio Hat I2S/I2C | Connector_PinHeader_1.27mm:PinHeader_1x10_P1.27mm_Vertical | J5 |
| 1 | Audio Hat Power | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J4 |
| 1 | CS42L52-CNZR | easyeda2kicad:QFN-40_L6.0-W6.0-P0.50-TL-EP4.1 | U1 |
| 1 | Mic | EasyEDA_Lib:AUDIO-TH_PJ-309A-2 | J2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | Phones | EasyEDA_Lib:AUDIO-TH_PJ-309A-2 | J1 |
| 1 | Speaker | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | LS1 |
| 1 | TLV73325PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
More from aliadnani/si4
1- 4 layers78 × 99 mm

Similar boards
- 4 layers100 × 68 mm

Basic ecp5-pcb
mattvenn/basic-ecp5-pcb
Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
75 parts144CC0-1.0 - 4 layers165 × 107 mm

- 4 layers101.8 × 83 mm

- 4 layers30.9 × 30.9 mm

Fpv video in v1
Cinetronix/fpv-video-in-v1
KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.
48 parts11 - 4 layers50 × 52 mm

- 4 layers166.3 × 166.3 mm

- 4 layers100 × 60 mm

- 2 layers

LCMScope
Damian-Wieclaw/LCMScope
Limitless Common Mode Scope. Battery powered probe with fast ADC with FPGA and UART connection. Data acquisition takes place when the trigger signal is high, later data is sent via UART to the computer.
6 parts
Questions
How big is the Si4-hat PCB?
It measures 31.5 × 47.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Si4-hat use?
45 parts, built around the CS42L52-CNZR and TLV73325PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Si4-hat KiCad files?
From the aliadnani/si4 repository on GitHub, at the commit this page was made from: the board is hardware/si4-hat/si4-hat.kicad_pcb and its schematic hardware/si4-hat/si4-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Si4-hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask aliadnani before reusing the design.