Skip to the content
2 layersLCMScope, the printed circuit board in 3D

Limitless Common Mode Scope. Battery powered probe with fast ADC with FPGA and UART connection. Data acquisition takes place when the trigger signal is high, later data is sent via UART to the computer. Purpouse of this device is to make precise measurements for high common mode signals.

Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
86
Pads
126
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
29 Jul 2025
Updated
5 Aug 2025

Parts

6
QtyValueFootprintReferences
1ASV-xxxMHzOscillator:Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mmY1
1ICE40UP5K-SG48ITRPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU1
1LTC2254Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU2
1MIC5365-3.3YC5Package_TO_SOT_SMD:SOT-353_SC-70-5U3
1TLV70212_SOT23-5Package_TO_SOT_SMD:SOT-23-5U4
1TLV73325PDBVPackage_TO_SOT_SMD:SOT-23-5U5

Similar boards

  • 4 layers100 × 68 mmBasic ecp5-pcb, the printed circuit board in 3D

    Basic ecp5-pcb

    mattvenn/basic-ecp5-pcb

    Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs

    75 parts144CC0-1.0
  • 4 layers165 × 107 mmSpla board, the printed circuit board in 3D

    Spla board

    khaydarian/spla

    SNES PPU Logic Analyzer

    290 parts32
  • 4 layers101.8 × 83 mmSd2snes ecp5, the printed circuit board in 3D

    Sd2snes ecp5

    samlittlewood/sd2snes_ecp5

    Lattice ECP5 variant of SD2SNES

    184 parts21GPL-2.0
  • 4 layers30.9 × 30.9 mmFpv video in v1, the printed circuit board in 3D

    Fpv video in v1

    Cinetronix/fpv-video-in-v1

    KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.

    48 parts11
  • 4 layers50 × 52 mmTt ecp5-cb, the printed circuit board in 3D

    Tt ecp5-cb

    MichaelBell/tt-ecp5-bb

    ECP5 FPGA breakout board for Tiny Tapeout demo board

    32 parts2
  • 4 layers166.3 × 166.3 mmFlatSatHub, the printed circuit board in 3D

    FlatSatHub

    astronautix/FlatSatHub

    IonSat's FlatSat Hub

    218 parts1
  • 4 layers100 × 60 mmCart ecp5, the printed circuit board in 3D

    Cart ecp5

    nelgau/hicart

    This is a present for an old friend!

    162 parts1

Questions

What parts does the LCMScope use?

6 parts, built around the ICE40UP5K-SG48ITR50, MIC5365-3.3YC5-TR and TLV73325PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LCMScope KiCad files?

From the Damian-Wieclaw/LCMScope repository on GitHub, at the commit this page was made from: the board is Electrical hardware/KiCAD Files/LCMscope.kicad_pcb and its schematic Electrical hardware/KiCAD Files/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LCMScope design in my own project?

Its repository states no licence, so its author keeps all rights: ask Damian-Wieclaw before reusing the design.