

CarAudioSteering
An Arduino based adapter for matching steering wheel controls to random car stereo units.
- Size
- 49.5 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 30
- Pads
- 102
- Tracks, vias
- 205, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2019
- Updated
- 3 Sep 2021
Overview
CarAudioSteering is an open-source printed circuit board by alexsomesan, from the alexsomesan/CarAudioSteering repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 49.5 × 21.6 mm with 28 parts on 30 nets, routed with 205 tracks and 34 vias.
It is built around the AD5272BRMZ-20 and AO3400A. Its parts include 7 capacitors, 4 connectors, 3 resistors, 2 ICs and 2 transistors. It belongs with the STM32 boards of this library.
Main components
2AD5272BRMZ-20
MSOP-10-40℃~+125℃ 1 1024 1uA 2.7V~5.5V 20kΩ 300kHz 35Ω、70Ω 50-TP 5ppm/℃ I2C Linear Non-volatile storage、Soft reset、Power-on reset ±1% MSOP-10 Digital Potentiometers ROHSAnalog DevicesDigital PotentiometersAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdCar Audio Steering
An microcontroller based adapter for matching steering wheel controls to random car stereo units.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | IN-1, IN+1, OUT-1, OUT+1 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C7 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | Cy1, Cy2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C5 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | ADC_TRIM1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | Ry1 |
| 1 | AD5272BRM | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Buttons | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Remote | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J3 |
| 1 | STM32F030F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | POW1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
Similar boards
- 6 layers199 × 0.3 mm

- 2 layers10 × 17.5 mm

- 4 layers149 × 95 mm

- 4 layers40 × 23 mm

- 4 layers81.2 × 96.6 mm

- 2 layers55 × 82.7 mm

- 4 layers42 × 42 mm

- 4 layers98 × 75 mm

PiFinder4
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
157 parts257GPL-3.0
Questions
How big is the CarAudioSteering PCB?
It measures 49.5 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CarAudioSteering use?
28 parts, built around the AD5272BRMZ-20 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CarAudioSteering KiCad files?
From the alexsomesan/CarAudioSteering repository on GitHub, at the commit this page was made from: the board is STM32Cube/hardware/CarAudioSteering/CarAudioSteering.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CarAudioSteering design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).