Skip to the content
2 layers131.9 × 164.6 mmCft bus, the printed circuit board in 3D

The CFT homebrew minicomputer

Size
131.9 × 164.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
152
Nets
295
Pads
987
Tracks, vias
2,879, 1,230
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
15 Aug 2019
Updated
5 Mar 2022

Overview

Cft bus is an open-source printed circuit board by alexiosc, from the alexiosc/cft repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 131.9 × 164.6 mm with 152 parts on 295 nets, routed with 2,879 tracks and 1,230 vias.

It is built around the 74HC541D, 74AC541SC and 74ACT245M, with the 74LVC1G125, 74LVC2G157DCU and 74HC138 among its other parts. Its parts include 56 capacitors, 51 ICs, 21 resistors, 3 diodes and 3 connectors.

Main components

12

README

README.md

CFT Logo

The CFT Home-Brew 16-bit Mini-Computer

The CFT is a home-designed, home-built mini-computer made from scratch.

I've designed and built the instruction set, data path, processor, computer, software stack, cross-assembler, emulator, software toolchain and even some of the tools needed to do all this. You can call this a ‘fantasy mini’.

This project has been going since approximately 2001, in my Copious Free Time.

Audience

There isn't one, so I couldn't tell you what it's like. This project has been online since 2005 and it's been noticed by four or five people. Not quite enough for statistics.

This is a personal project, and the repository is made public as a curiosity. Expect everything to be wrong, broken, or dangerous.

Why?

Because it's fun.

To see how it's done.

To recall Those Heady Times.

To prove to myself I can do this.

What?

The CFT is a long-term project built in my Copious Free Time. (a term used, as always, sarcastically, hence the name) It's a homebrew, self-designed, self-built Sixties-style 16-bit mini computer built out of 74-family integrated circuits. Check out the ChangeLog for the current status.

There may possibly be more stuff to look at, at https://www.bedroomlan.org/cft.

The project consists of:

  • The CFT processor.
  • Peripherals and cards, some implementing extensions to the CFT instruction set.
  • A front panel with blinkenlights.
  • A case for the lot.
  • Documentation for everything, including the website and this.
  • A cross-toolchain for working on the computer from a PC.

The CFT Processor

  • A 4 MHz clock. (250ns processor cycle)
  • 16-bit word length. No byte access.
  • 24-bit memory address bus.
  • 16-bit I/O bus shared with the address bus. (the lower 1,024 addresses are easier to use)
  • All instructions are exactly one 16-bit word long.
  • Some instructions follow the PDP-8 ‘microcoded’ format with bitfields cotrolling combinations of actions. Bitwise negation, two's complement negation and incrementation are the same instruction with slightly different options.
  • A relatively simple instruction set inspired by the PDP-8. This has moved on to something slightly more reminiscent of a modern processor.
  • Microcoded design.
  • Accumulator based architecture.
  • Four user-accessible 16-bit registers with increment and decrement. Only the Accumulator (AC) is general purpose.
  • PDP-8 style magic addresses working like auto-increment or auto-decrement index registers, or stack pointers.

Peripherals

I originally sat down with Eagle CAD and went crazy with it. I had 50 sheets of schematics for boards, all with a three-letter designator:

  • MEM: A memory board with 512 KWords of RAM and 512 KWords of ROM.
  • TTY: A quadruple serial board including both DCE and DTE connections, and a TTL one for an FTDI USB adaptor.
  • INT: 8-interrupt controller board.
  • IDE: Twin IDE bus interface for up to four drives.
  • RTC: A real-time card with some NVRAM and three or six programmable timers.
  • ETH: An offloaded Ethernet interface using the WIZ812 chip.
  • KBD: A PS/2 Keyboard interface in pure discrete logic.
  • PSG: A sound board with one or two AY-3-8910 chips and a SpeakJet® speech synthesiser.
  • PFP: A Programmer's Front Panel capable of debugging microcode as well as full machine code.
  • DEB: A DEBugging card to help diagnose problems with the hardware using a remote controller. (this was basically a simple, slow, specialised logic analyser)
  • FDC: A Floppy Drive Controller for up to four drives, including 8-inch 50-pin ones.
  • GIO: General Purpose I/O board including some digital I/O, two Atari-style digital joystick ports, a unidirectional parallel printer port, four user-controllable LEDs on the front panel (the PFP already had 16) and (on a whim) a cassette tape interface.
  • MBU: processor extension to allow 21-bit memory addressing (up to 2 MWords).
  • µCB: processor extension to allow multiple versions of microcode to co-exist. (I had spare space in the Microcode ROMs)
  • VDU: a graphics card that does text at 80×25 and 40×25, and graphics at combinations of 160, 320, 640 columns and 100, 200, 400 rows with 64 colours.

The currently planned peripherals are much more modest in scope, but they also morphed quite a bit. The processor can now do 24-bit addressing natively, the current microcode uses all of the available ROM space and a bunch of cards have joined forces. The current state of affairs looks like this:

  • MEM: (tentative design) 512 kWords or 1 MWord of RAM, 512 KWords of ROM. Multiple cards can be installed. If density allows, there'll be more chip sockets for RAM.
  • INT: 8 interrupt controller board.
  • DFP: a big card containing both a remote debugging system and front panel drivers.
  • TTY: serial port card, possibly colocated with…
  • IDE: one or two IDE sockets for two or four IDE drives. (or CF cards, but I like the possibility of having some clunky old drive)
  • SND: MIDI sound output. Possibly collocated with…
  • VDU: a graphics card that does text at 80×30 and 40×30, and graphics at combinations of 160, 320, 640 columns and 120, 240, 480 rows using 64 colours. The new VDU card fits inside a CPLD and also includes a PS/2 interface.
  • RTC: Real-time clock, timers.

I've built the MEM and DFP boards to pre-2019 specs and the computer was working on them.

The 2019 redesign goes for proper PCBs for everything, so things are taking a little extra time.

Front Panel

I was really proud of the front panel before the 2019 redesign, it worked great and showed the computer's entire status. There's support for up to 160 lights, 31 switches and two keylocks for that PDP-8 feel.

The downside was the wiring: there were no fewer than five 50-wire ribbon cables going to this crazy bastard.

The 2019 redesign keeps the layout, but can no longer display as much of the computer's status on the front panel. I'm working on it. On the upside, it now serialises data transmission and only a single 40-pin cable is needed.

To cut costs, the original front panel was made out of eight modules, each with up to 20 LEDs. The new front panel is made out of four modules, each with up to 40 LEDs. Each module daisy-chains to the next.

Switches are mounted on a separate plate and wired to a break-out board, or the closest front panel modules on the 2019 version.

The Case

Two words: wood paneling. Well, and a black acrylic front piece. The rest will depend on how big the card cage gets, but I'll scratch make the case out of sheet aluminium and wood.

Documentation

There's just too much of it. The documentation was initially in LaTeX and got up to 500 pages before I gave that up and started converting it to HTML.

The 2019 redesign will need a redo of most of this, sadly, but the current documents for hardware that's currently around are available at https://www.bedroomlan.org/hardware/cft/book/.

Software and Hardware Tools

I had to make my own tools for some of this, and wanted to make my own for some other parts.

Hardware tools include Flashprog, a zero-parts flash programmer with a modern serial interface. The interface formed the basis of the DEB and DFP cards' remote debugging interface and I'm quite happy with it.

Software tools include:

  • The Microcode Assembler, also available on Github as https://github.com/alexiosc/mcasm.
  • The CFT Assembler, written purely in Python and roughly based on PDP-8 Assemblers, but with some modern extras like namespaces and simple macros.
  • Too many emulators to speak of!
    • A basic microcode-level emulator in Python to verify the original design. This one is dead and buried, but still in the repository.
    • A Verilog emulator used to verify the hardware.
    • A C emulator that's fast enough to run software on.
    • A Javascript microcode-level emulator that runs on the web. It's very slow, but it shows how the front panel works.
    • A newer JS-based emulator meant to me much faster. Still largely in the works, because I prefer the C-based emulator for testing.
  • A testing framework that can run test suites on any emulator we can use.
  • A basic Operating System for the CFT.
  • A self-documenting Forth interpreter written in Assembly and Forth.

Parts

152
QtyValueFootprintReferences
51100nFalexios:C_SMD_0805_2012Metric_Pad1.15x1.40mm_HandSolderC10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +35
104.7kΩalexios:R_SMD_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R9, R13, R14
1074LVC2G157alexios:TSSOP-8_3x3mm_P0.65mmU13, U16, U20, U21, U23, U24, U25, U27, U28, U29
90Ωalexios:R_SMD_0805_2012Metric_Pad1.15x1.40mm_HandSolderR8, R10, R11, R12, R15, R17, R18, R21, R22
674HC138alexios:SOIC-16U2, U5, U7, U10, U17, U30
674HC541alexios:SOIC-20WU4, U19, U32, U36, U38, U39
547µFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2, C6, C7, C56
474HC670alexios:SOIC-16U9, U11, U14, U15
474LVC1G32alexios:SOT-23-5_HandSolderingU34, U41, U46, U51
474LVC1G74alexios:TSSOP-8_3x3mm_P0.65mmU8, U18, U42, U47
374AC541alexios:SOIC-20WU1, U3, U12
374HC574alexios:SOIC-20WU31, U35, U37
374LVC1G04alexios:SOT-23-5_HandSolderingU6, U22, U43
374LVC1G0832alexios:SOT-23-6_HandsolderingU26, U40, U44
3Jumper_3_Bridged12alexios:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP3, JP4, JP5
2680Ωalexios:R_SMD_0805_2012Metric_Pad1.15x1.40mm_HandSolderR16, R23
274ACT245alexios:SOIC-20WU48, U50
2Conn_02x06_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1, J2
2LED_ALTalexios:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2, D5
2TestPointTestPoint:TestPoint_Pad_1.0x1.0mmTP3, TP5
174LVC1G08alexios:SOT-23-5_HandSolderingU33
174LVC1G11alexios:SOT-23-6_HandsolderingU49
174LVC1G125alexios:SOT-23-5_HandSolderingU45
1CFT-2019-Busalexios:CFT-2019-Card-EdgeP1
1D_ALTalexios:SOD-323D1
1LOGOalexios:CFTG***
1SolderJumper_2_Bridgedalexios:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1

The 141 most common of 152 parts.

More from alexiosc/cft

12
  • 2 layers233.4 × 280 mmProtoboard, the printed circuit board in 3D

    Protoboard

    alexiosc/cft

    The CFT homebrew minicomputer

    8,208 parts6GPL-3.0
  • 2 layers233.4 × 280 mmCft board0, the printed circuit board in 3D

    Cft board0

    alexiosc/cft

    The CFT homebrew minicomputer

    299 parts6GPL-3.0
  • 2 layers233.4 × 280 mmCft board1, the printed circuit board in 3D

    Cft board1

    alexiosc/cft

    The CFT homebrew minicomputer

    269 parts6GPL-3.0
  • 2 layers233.4 × 280 mmCft dfp, the printed circuit board in 3D

    Cft dfp

    alexiosc/cft

    The CFT homebrew minicomputer

    227 parts6GPL-3.0
  • 4 layers622.7 × 375.7 mmCft ctl, the printed circuit board in 3D

    Cft ctl

    alexiosc/cft

    The CFT homebrew minicomputer

    215 parts6GPL-3.0
  • 4 layers131.9 × 164.6 mmCft ctl dip, the printed circuit board in 3D

    Cft ctl dip

    alexiosc/cft

    The CFT homebrew minicomputer

    215 parts6GPL-3.0
  • 2 layers131.9 × 164.6 mmTic layout1, the printed circuit board in 3D

    Tic layout1

    alexiosc/cft

    The CFT homebrew minicomputer

    184 parts6GPL-3.0
  • 2 layers99.7 × 143.4 mmCft front panel-1951, the printed circuit board in 3D

    Cft front panel-1951

    alexiosc/cft

    The CFT homebrew minicomputer

    164 parts6GPL-3.0

Similar boards

  • 2 layers234 × 87.3 mmV0c, the printed circuit board in 3D

    V0c

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    123 parts
  • 4 layers152 × 122.5 mmController board, the printed circuit board in 3D

    Controller board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    93 parts2CERN-OHL-S-2.0
  • 4 layers324.3 × 185.6 mmGriffin, the printed circuit board in 3D

    Griffin

    bradgrantham/griffin

    An M68000 homebrew SBC. See the design notes.

    305 partsApache-2.0
  • 2 layers208 × 110 mm8 16 computer 2, the printed circuit board in 3D

    8 16 computer 2

    halfburnttoast/TCPU816-v1

    Version 1.1 of my 8-bit, TTL computer.

    120 parts21
  • 2 layersBreadBin, the printed circuit board in 3D

    BreadBin

    c0pperdragon/BreadBin

    A CPU made of 7400 logic on breadboards - inside a bread bin ;-)

    45 parts18
  • 2 layers133 × 82 mmHD6309 computer, the printed circuit board in 3D

    HD6309 computer

    trcwm/HD6309-Computer

    A computer based on the HD6309 CPU, done for the Retro Challenge 2017/04.

    52 parts17
  • 2 layers299.7 × 198.1 mmCisc-8, the printed circuit board in 3D

    Cisc-8

    nailed-barnacle/Cisc-8-ttl-processor

    A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder

    319 parts1MIT
  • 2 layers180 × 67.5 mmNEW KANJI ROM, the printed circuit board in 3D

    NEW KANJI ROM

    bml3mk5/S1KanjiRomJIS2

    JIS Level 2 Kanji ROM Card for HITACHI MB-S1

    61 parts

Questions

How big is the Cft bus PCB?

It measures 131.9 × 164.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cft bus use?

152 parts, built around the 74HC541D, 74AC541SC, 74ACT245M and 74LVC1G125. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cft bus KiCad files?

From the alexiosc/cft repository on GitHub, at the commit this page was made from: the board is kicad/cft/cft-bus/cft-bus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cft bus design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).