

LEDDriver
A method to make pcb's taste as good as possible
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 18
- Pads
- 75
- Tracks, vias
- 161, 92
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jan 2026
- Updated
- 10 Jan 2026
Overview
LEDDriver is an open-source printed circuit board by alexchunlin, from the alexchunlin/good-flavored-pcb repository on GitHub. It is a 2-layer board with 26 parts on 18 nets, routed with 161 tracks and 92 vias.
Its parts include 8 resistors, 5 diodes, 4 capacitors, 4 ICs and 4 inductors.
README
README.mdgood-flavored-pcb
This is a community review of the LEDDriver PCB project.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.2Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | 10μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | 68uH | Inductor_SMD:L_Ferrocore_DLG-0703 | L1, L2, L3, L4 |
| 4 | AL8861Y-13 | CharlieFootprint:CONV_AL8861Y-13 | U1, U2, U3, U4 |
| 4 | Schottky | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D2, D3, D4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ~ | CharlieFootprint:LEDCOB4 | LED1 |
Similar boards
- 2 layers57.3 × 19 mm

- 2 layers98 × 59.5 mm

MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm

- 2 layers86.1 × 86.1 mm

- 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm

L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT - 2 layers40.6 × 50.8 mm

WALTsm
google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
26 parts474Apache-2.0 - 2 layers158.5 × 75 mm

Questions
What parts does the LEDDriver use?
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDDriver KiCad files?
From the alexchunlin/good-flavored-pcb repository on GitHub, at the commit this page was made from: the board is LEDDriver.kicad_pcb and its schematic LEDDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask alexchunlin before reusing the design.