
Before
alxgmpr/moisture-sensor
Indoor capacitive soil moisture sensor - nRF54L15 + nPM1300 + FDC1004, BTHome v2 over BLE

Custom STM32N6 FPV flight controller with 5 GHz video, 915 MHz control, MIPI CSI, and mixed-signal/RF PCB design
Drone is an open-source printed circuit board by alexanderjgshort, from the alexanderjgshort/SoftDrone repository on GitHub. It is a 6-layer board of 80 × 50 mm with 244 parts on 268 nets, routed with 622 tracks and 343 vias.
It is built around the ECMF2-40A100N6, TPD1E1B04DPYR and 6DFN36CA-M3, with the B5819WS among its other parts. Its parts include 125 capacitors, 45 resistors, 13 inductors, 8 diodes and 7 ICs. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100n | Capacitor_SMD:C_0201_0603Metric | C11, C12, C16, C19, C20, C22, C100, C101, C102, C103, C104, C106, C107, C108, C123, C127 +13 |
| 13 | 1u | Capacitor_SMD:C_0201_0603Metric | C9, C10, C24, C40, C41, C57, C105, C109, C110, C111, C112, C113, C115 |
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C32, C33, C34, C49, C55, C66, C70, C71, C75, C94, C116, C117 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C76, C77, C86, C89, C92, C96, C97, C119, C121, C125 |
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric | C17, C18, C68, C73, C74, C78, C80, C81 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | TPD1E1B04DPYR | SoftDroneLibrary:TPD1E1B04DPYR | D3, D4, D6, D7, D8, D9 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C67, C69, C72, C79, C93 |
| 5 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C13, C26, C29, C30, C31 |
| 5 | 47k | Resistor_SMD:R_0201_0603Metric | R35, R36, R37, R38, R39 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R40 |
| 4 | 15u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5 |
| 4 | 2.2k | Resistor_SMD:R_0402_1005Metric | R13, R14, R43, R44 |
| 4 | 20p | Capacitor_SMD:C_0201_0603Metric | C43, C44, C58, C122 |
| 4 | 22u | Capacitor_SMD:C_0603_1608Metric | C14, C15, C27, C28 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C42, C98, C124 |
| 3 | 200R | Resistor_SMD:R_0402_1005Metric | R30, R31, R34 |
| 3 | 5k | Resistor_SMD:R_0402_1005Metric | R19, R21, R23 |
| 3 | C | Capacitor_SMD:C_0603_1608Metric | C45, C59, C60 |
| 3 | ECMF2-40A100N6 | SoftDroneLibrary:ECMF2-40A100N6 | U25, U26, U27 |
| 3 | L | Inductor_SMD:L_0603_1608Metric | L4, L5, L12 |
| 2 | 0.47u | SoftDroneLibrary:TFM201610ALC-R47MTAA | L2, L3 |
| 2 | 1.8p | Capacitor_SMD:C_0402_1005Metric | C52, C53 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R32, R33 |
| 2 | 10p | Capacitor_SMD:C_0201_0603Metric | C62, C63 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 150k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C85, C114 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 23.7k | Resistor_SMD:R_0402_1005Metric | R20, R22 |
| 2 | 49.9k | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R28, R29 |
| 2 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | MM8030_2610RJ3 | SoftDroneLibrary:MM8030-2610RJ3 | U23, U24 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R41, R42 |
| 2 | TPS628303 | TPS628303ARZER:WQFN-HR8_RZE_TEX | U3, U5 |
| 1 | 0R | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 1.12M | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10.2k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C84 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.4 | C120 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | FB2 |
| 1 | 15n | Inductor_SMD:L_0402_1005Metric | L10 |
| 1 | 15u | Inductor_SMD:L_0603_1608Metric | L11 |
| 1 | 18R | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C61 |
| 1 | 1u | SoftDroneLibrary:CVH201610A-2R2M | L1 |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C83 |
| 1 | 2.49k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 2.4p | Capacitor_SMD:C_0402_1005Metric | C54 |
| 1 | 2.5n | Inductor_SMD:L_0402_1005Metric | L8 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C118 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 2R | Resistor_SMD:R_0402_1005Metric | R45 |
| 1 | 3.3u | SoftDroneLibrary:74439324033 | L13 |
| 1 | 33u | Capacitor_SMD:C_1812_4532Metric | C88 |
| 1 | 39p | Capacitor_SMD:C_0402_1005Metric | C51 |
| 1 | 3p | Capacitor_SMD:C_0402_1005Metric | C48 |
| 1 | 4.7n | Inductor_SMD:L_0402_1005Metric | L9 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C56 |
| 1 | 47n | Inductor_SMD:L_0402_1005Metric | L7 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C47 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C46 |
| 1 | 47u | Capacitor_SMD:C_1206_3216Metric | C95 |
| 1 | 5.6p | Capacitor_SMD:C_0402_1005Metric | C50 |
| 1 | 51.1k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 523k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 53.6k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 54548-2272 | 54548-2272:545482272 | J1 |
| 1 | 6DFN36CA | SoftDroneLibrary:6DFN12CA | D2 |
| 1 | Antenna | ANT-916-HETH:ANT916HETH | AE2 |
| 1 | Antenna | SoftDroneLibrary:ANT-DB1-NSP250-T | AE1 |
| 1 | B5819WS | Diode_SMD:D_SOD-323 | D5 |
| 1 | BM08B-SRSS-TB_LF__SN_ | BM08B-SRSS-TB_LF__SN_:BM08BSRSSTBLFSN | J2 |
The 213 most common of 244 parts.

alxgmpr/moisture-sensor
Indoor capacitive soil moisture sensor - nRF54L15 + nPM1300 + FDC1004, BTHome v2 over BLE


Vibhors-Tech-Hub/ESP32-S3-Dev-Board
A 4-layer dev board around the ESP32-S3-MINI-1 with dual USB-C ports

Andresse2020/NovaDrone-Hardware
Complete electronic system design for a high-performance quadcopter drone, developed entirely from scratch. Includes power distribution, motor control, flight stabilization, sensor integration, and communication…



tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.

It measures 80 × 50 mm and has 6 copper layers, 1.56 mm thick.
244 parts, built around the ECMF2-40A100N6, TPD1E1B04DPYR, 6DFN36CA-M3 and B5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alexanderjgshort/SoftDrone repository on GitHub, at the commit this page was made from: the board is hardware/drone/_restore_backup_2026-09-17T12-52-13-706/drone.kicad_pcb and its schematic hardware/drone/Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alexanderjgshort before reusing the design.