
EveningStar
ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.

A simple development board with an LED and GPIOs on Pin headers. includes an ICSP Header and selectable dual power supply with a screw terminal
PIC12 UNIVERSAL Devboard v1 THT is an open-source printed circuit board by alexanderjg85, from the alexanderjg85/simple_pic12_pdip8_universal_devboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 40 mm with 39 parts on 18 nets, routed with 169 tracks and 36 vias.
It is built around the 78L05G, SI2301 and XC6206-3.3V, with the SS14 among its other parts. Its parts include 5 capacitors, 4 resistors, 4 ICs, 4 diodes and 3 connectors. It belongs with the microcontroller boards boards and the PIC boards of this library.
A simple development board with an LED and GPIOs on Pin headers. Includes an ICSP Header and selectable dual power supply with a screw terminal
This project is dual-licensed / Dieses Projekt ist dual-lizenziert:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1 uF | AJ_Passives:C6119929_C0805 | C1, C3, C4 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4 |
| 2 | SS14 | Diode_SMD:D_SMA_Handsoldering | D1, D4 |
| 1 | 100nF | AJ_Passives:C49678_C0805 | C5 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 470nF | AJ_Passives:C13967_C0805 | C2 |
| 1 | 680 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 78L05G | AJ_Power:C71136_SOT-89-3_L4_5-W2_5-P1_50-LS4_2-BR | U2 |
| 1 | CLK | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_PIC_ICSP_ICD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | DAT | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | GP4 | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | GP5 | TestPoint:TestPoint_Pad_D1.5mm | TP11 |
| 1 | GREEN | LED_THT:LED_D3.0mm | D2 |
| 1 | JP_PLED | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | JP_SLED | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP3 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | LED | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | PIC12F617-xP | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | SI2301 | AJ_Transistors:C28642376_SOT-23-3_L2_9-W1_3-P1_90-LS2_4-BR | U4 |
| 1 | SLED | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | SW_RESET | AJ_Electromechanical:SW_SPST_PTS647_Sx38_Handsolder | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | VCC | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | VCC3_3 | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | VCC5 | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | VDD | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | XC6206-3.3V | AJ_Power:C3015484_SOT-23-3_L2_9-W1_3-P0_95-LS2_4-BR | U3 |
| 1 | YELLOW | LED_THT:LED_D3.0mm | D3 |
The 35 most common of 39 parts.

ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.

EOSCogniton/ELIZ-2022
Le Git Artemiz de l'EPSA. Contient le Catia, ainsi que la documentation en cours et quelques modèles.

SushiBits/Gowinduino
Arduino-compatible evaluation board with Gowin GW1NSR-4C FPGA

sandman21vs/SandKrux
Placa de desenvolvimento baseada no chip K210, com entradas para touch, câmera e LCD grande, criada especificamente para rodar o firmware Krux.




botaneta/All-in-one-diybms
Proyecto de módulo para lectura y balanceo de celdas hasta 16S
It measures 70 × 40 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the 78L05G, SI2301, XC6206-3.3V and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alexanderjg85/simple_pic12_pdip8_universal_devboard repository on GitHub, at the commit this page was made from: the board is Hardware/PIC12_UNIVERSAL_Devboard_v1_THT/PIC12_UNIVERSAL_Devboard_v1_THT.kicad_pcb and its schematic Hardware/PIC12_UNIVERSAL_Devboard_v1_THT/PIC12_UNIVERSAL_Devboard_v1_THT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).