4 layers80.6 × 54 mm
Frank core2
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)
195 parts4GPL-3.0
2 layers14 × 14 mm
PulsePCB
alejandro3141592/PulsePCB1- Size
- 14 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 13
- Pads
- 39
- Tracks, vias
- 82, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Jul 2026
- Updated
- 6 Jul 2026
Overview
PulsePCB is an open-source printed circuit board by alejandro3141592, from the alejandro3141592/PulsePCB repository on GitHub. It is a 2-layer board of 14 × 14 mm with 10 parts on 13 nets, routed with 82 tracks and 6 vias.
It is built around the MAX30102EFD+T and XC6206P182MR-G. Its parts include 6 capacitors, 1 resistor, 1 IC and 1 connector.
Main components
2
MAX30102EFD+T
OESIP-14-40℃~+85℃ 1.2mA 1.7V~2V 18bit I2C OESIP-14 Heart Rate Sensors ROHSMaxim Integrated (Analog Devices)Heart Rate Sensors
XC6206P182MR-G
SOT-23-40℃~+85℃@(Ta) 1 1.8V 150mV@(100mA) 1uA 6V 80mA Fixed Over Current Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 5051100692 | 5051100692:MOLEX_5051100692 | J1 |
| 1 | MAX30102EFD+T | MAX30102EFD:MAX30102EFDT | IC1 |
| 1 | XC6206P182MR-G | XC6206P182MR:SOT95P280X130-3N | PS1 |
Questions
How big is the PulsePCB PCB?
It measures 14 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PulsePCB use?
10 parts, built around the MAX30102EFD+T and XC6206P182MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PulsePCB KiCad files?
From the alejandro3141592/PulsePCB repository on GitHub, at the commit this page was made from: the board is PulsePCB/PulsePCB.kicad_pcb and its schematic PulsePCB/PulsePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PulsePCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask alejandro3141592 before reusing the design.
Similar boards
- 2 layers30 × 24 mm
- 2 layers56 × 6.2 mm
- 4 layers60.2 × 43.6 mm
- 4 layers30 × 70 mm
Wearable
brnna05/senior-design-strength-training
Senior Design project for ECE 364D - Fitness wearable for strength training
73 parts - 2 layers61.5 × 55 mm
Psycon wearable
CodeSakshamY/Half-life-HackClub
custom pcb for my psycon wearable project. designed in easyeda.
47 parts - 2 layers45 × 45 mm
Watch
DINDIN2007/Blystwatch
This is a demo board to showcase development with both the BlystL15 (based on the nrf54L15) and the IOComposer AI from I-Syst.inc.
47 parts - 2 layers93 × 75 mm
