
EE326 Webcam
alegoldstein/Webcam
Custom webcam built around an Atmel MCU for image collection and processing and an ESP32 to host a web server

Custom webcam built around an Atmel MCU for image collection and processing and an ESP32 to host a web server
ADS Real is an open-source printed circuit board by alegoldstein, from the alegoldstein/Webcam repository on GitHub. It is a 2-layer board of 80 × 76.2 mm with 11 parts on 55 nets, routed with 34 tracks and 0 vias.
It is built around the TEENSY 4.1 and BNO055. Its parts include 1 IC and 1 switch. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Objective: Create a webcam from scratch, including PCB, firmware, and enclosure
Steps Taken:
Outcome: A functional webcam that streams images to the web when there is a connected client.
PCB Schematic
Routing of PCB
![]() Assembled PCB (hand soldered) |
![]() PCB inside of 3D printed box |
![]() Final product |
Live streaming of webcam to website
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 1 | BNO055 | BNO055:BNO055 | U2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LiPo | FlatPads_SMD:SolderPad_5.5mm_2Pads_Directional | BT1 |
| 1 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | Pull_Pin | FlatPads_SMD:SolderPad_5.5mm_2Pads_Bidirectional | SW1 |
| 1 | Teensy4.1 | teensy:Teensy41 | Teensy 4.1 |
| 1 | ~ | StepDown:5V_3.4A_Step_Down | 5V_3.4A_Step_Down1 |
| 1 | ~ | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | BMP1 |
The 10 most common of 11 parts.

alegoldstein/Webcam
Custom webcam built around an Atmel MCU for image collection and processing and an ESP32 to host a web server

01binary/str1ker
A human-scale mech integrated with Robot Operating System



Rujul-Rumale/INSPACe-CanSat-Team-Tejas-PCB-Design
Onboard computer PCB for the INSPACe Team Tejas CanSat — Teensy 4.1 + XBee + sensor suite, designed in KiCad. Schematic, layout, Gerbers, 3D renders and libraries.

uwp-sammckee/DataLogger
PACKET BREAKDOWN: 0-roll\ 1-pitch\ 2-yaw\ 3-alitude\ 4-pressure\ 5-temperature\ 6-accX\ 7-accY\ 8-accZ\ 9-gyroX\ 10-gyroY\ 11-gyroZ\ 12-time\ 13-placeholder\ 14-placeholder\ 15-placeholder



Kushal-Sachdeva78/VVS-Ballers-RoboCup
Autonomous RoboCupJunior Soccer (IR League) robots by Team VVS Ballers: 9th place at RoboCup 2026 in Incheon. Teensy 4.1 multi-board electronics, IR/line/ultrasonic sensing, OpenMV vision, 48 V solenoid kicker.
It measures 80 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the TEENSY 4.1 and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alegoldstein/Webcam repository on GitHub, at the commit this page was made from: the board is PCB/Symbols+Footprints/ADS/ADS_Real/ADS_Real.kicad_pcb and its schematic PCB/EE326 Webcam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alegoldstein before reusing the design.