2 layers139.7 × 134.1 mm
2 layers139.7 × 134.1 mm
MigitepadGlow
Aleblazer/MigitePad3Nav/Control/Num Pad
- Size
- 139.7 × 134.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 83
- Pads
- 695
- Tracks, vias
- 915, 100
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Feb 2020
- Updated
- 25 Feb 2021
Overview
MigitepadGlow is an open-source printed circuit board by Aleblazer, from the Aleblazer/MigitePad repository on GitHub, published under the MIT licence. It is a 2-layer board of 139.7 × 134.1 mm with 106 parts on 83 nets, routed with 915 tracks and 100 vias.
Its parts include 61 diodes, 2 connectors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMigitePad
MigitePad! A Numpad/Nav Cluster with QMK Firmware/Kailh Hotswap/OLED/Rotary Encoder!
Even reversable for you crazies who want a backwards Numpad!*
*OLED will need to be trace cut and bodged if you want it to work backwards
Materials needed:
- 30x Kailh Hotswap Sockets (Technically optional, hotswap through holes are plated)
- 31x 1N4148 or SOD-123F Diodes
- 30x MX style switches
- 1x MJTP1117 Reset Switch
- 1x Pro Micro or equivilant (Pro Micro chip side up for normal orientation, bottom side up for reversed.)
- 3x 2u stabilizers
- 1x EC11 Rotary Encoder
- 1x SSD1306 OLED (Optional)
For the 3D Printable Case:
- 6x 6mm M2 standoffs
- 12x M2 4mm or 5mm screws
OLED and Rotary Encoder code would need to be added to the end of your keymap.c. Still working on a more official OLED config. Example code borrowed and tested as working from the RoMac+, and is located in "QMK Keyboard Folder/migitepad/keymaps/default/keymap.c". Also encluded a default hex file in the QMK Keyboard Folder.
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | D_Small | Lily58-footprint:Diode_TH_SOD123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15 |
| 30 | MX-NoLED | keyswitches:MXOnly-1U-Hotswap-Double-noled | MX1, MX10, MX12, MX14, MX16, MX18, MX20, MX22, MX24, MX26, MX28, MX30, MX32, MX34, MX36, MX38 +14 |
| 30 | SK6812MINI-EASY-SOLDER | SK6812MINI:YS-SK6812MINI-E | D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47 +14 |
| 6 | MountingHole | Lily58-footprint:HOLE_M2_TH | H4, H5, H6, H7, H8, H9 |
| 3 | MountingHole | keyswitches:Stabilizer_MX_2u | H1, H2, H3 |
| 1 | LED-Lily58-cache | Lily58-footprint:LED | J2 |
| 1 | LOGO | Logo:MigiteLogo | G*** |
| 1 | OLED | Lily58-footprint:MY_SIL-4 | J1 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_EC11 | SW2 |
| 1 | SW_Push | Keebio-Parts:SW_Tactile_SPST_Angled_MJTP1117 | SW1 |
Questions
How big is the MigitepadGlow PCB?
It measures 139.7 × 134.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MigitepadGlow use?
106 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MigitepadGlow KiCad files?
From the Aleblazer/MigitePad repository on GitHub, at the commit this page was made from: the board is MigitepadGlow.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MigitepadGlow design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Aleblazer/MigitePad
1Similar boards
- 2 layers78 × 26 mm
ESP32-li ion cell monitor
pcbreflux/espressif
all espressif stuff will committed here
106 parts608GPL-3.0 - 2 layers367.5 × 124.2 mm
Platinum IIe keyboard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
106 parts446 - 2 layers85.6 × 54 mm
Ramn
ToyotaInfoTech/RAMN
RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.
106 parts285 - 2 layers96.5 × 66 mm
ArduSensorDuino
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
106 parts282 - 2 layers196.9 × 125.1 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
106 parts184 - 2 layers196.7 × 84.6 mm
- 2 layers233.9 × 89.2 mm
Dropin
Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards
106 parts144CERN-OHL-W-2.0 - 2 layers182.8 × 169.2 mm
ErgoMaxReversible
LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
106 parts124